Parshvi Technology (India) Private Limited

TEP LL 2-wire temperature transmitter is designed for pipe strap-on installations, for heating and cooling applications. Transmitter information can be used to control other device in the HVAC system.

Temperature is measured by a Pt1000 sensor element. The sensor element resistance information is converted into a 4…20 mA signal. The temperature range can be chosen at the commissioning.

TEP LL transmitter can be equipped with a 3.5-digit liquid crystal display option TE-N V2. The display resolution is 0.1 °C.

Housing is made of heat resistant plastics. The bayonet cover and the terminal blocks tilted to 45 Degree make an easy installation. Transmitter is mounted on the pipe by means of an adjustable tie.

Range selection  0...+50°C /0…+100 °C/ -50…+50 °C /-50…+150 °C


 

TEP temperature transmitters are designed for pipe strap-on installations, for heating and cooling applications. Sensor is mounted on the pipe by means of an adjustable tie. Transmitter’s settings can be changed by using the ML-SER tool

• Power supply : 24 Vac/dc, < 1 VA
• Temperature measurement range : 0...50 °C, 0...100 °C, -50...50 °C, -50...150 °C
• Temperature measurement accuracy : ±0.5 °C
• Probe : 41 x 15 x 6 mm
• Sensor : Pt1000 EN 60751/B
• Voltage output : 0...10 Vdc, 2 mA (temperature or controller)
• IP protection class : IP54
• IP protection class : note cable or probe downwards
• Cable gland : M16
• Mounting : by a band on the pipe (diam. 40...90 mm)

TENA LL 2-wire temperature transmitter is designed for hot water temperature control applications. Transmitter information can be used to control other device in the HVAC system. Temperature is measured by a Pt1000 sensor element. The sensor element resistance information is converted into a 4…20 mA signal. with time constant 2.5 s
The temperature range can be chosen at the commissioning.
TENA LL transmitter can be equipped with a 3.5-digit liquid crystal display option TE-N V2.The display resolution is 0.1 °C.

Housing is made of heat resistant plastics. The bayonet cover and the terminal blocks tilted to 45??? make an easy installation. The material of the stem is stainless steel for prolonged life. Sensor is installed to the water pipe by means of the R1/2” threads.

There are also available 50 mm and 210 mm immersion length transmitter versions for alternative installation

Range selection 0…+50 °C *0…+100 °C *-50…+50 °C *-50…+150 °C

Technical data:
supply voltage 15…35 Vdc
sensor Pt1000 EN 60751/B
output 4…20 mA (temperature / controller)
temperature range selectable
connection R ½” thread stem Ø 4 mm x 85 mm,
material AISI316 housing plastics (< 120 ???C)
protection class IP54, cable entry or stem down cable entry M16 pressure rating PN16
accuracy ± 0.5 °C (at 50 °C)
ambient temperature 0…+60 °C
transmitter type 2-wire
time constant 2.5 s