Call 08048971769 88% Response Rate

our range

temperature sensors

Offering you a complete choice of products which include intrinsically safe infrared temperature sensor for high ambient temperatures, extempmini, pyromini 2.2 series: non-contact temperature sensors for short wavelengths, fast response immersion sensor, frost guard sensor, immersion temperature transmitter teat ll and extempmini miniature intrinsically safe infrared temperature sensor for high ambient temperatures.
  • Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures, ExTempMini
  • Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures, ExTempMini
Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures, ExTempMini

Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures, ExTempMini

Rs 1.35 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandCalex
Temperature Range0 to 1000 Deg C
Accuracy+/-1 %
Model NumberExTempMini
ApplicationIndustrial
Response Time240 ms
Emissivity0.1 to 1.1
Repeatability0.5%
OutputTwo-wire 4 to 20 mA (loop powered)
Supply Voltage12 to 24 V DC
Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures, ATEX, IECEx, JapanEx and UKCA Certified

The ExTempMini is an intrinsically safe pyrometer. It measures the temperature of surfaces in hazardous areas without contact, and provides a direct 4-20 mA output. It is certified to ATEX, IECEx, UKCA and JapanEx standards.

Explosion proof pyrometers typically have bulky, expensive housings, however because the ExTempMini uses Intrinsic Safety as the method of protection, it is compact and low-cost.

Features
  • Temperature range: -20°C to 1000°C
  • Sensing head for use in ambient temperatures up to 180°C
  • ATEX, IECEx and UKEX certified up to Zone 0 (gas)
  • JapanEx certified
  • 4-20 mA output, two-wire, loop-powered
  • Optional RS-485 network adapter and USB configuration tool
  • Supplied with 5 m, 10 m or 25 m sensing head cable
  • Stainless steel 316 housing, ideal for offshore applications
  • Not designed or approved for fever detection
General SpecificationsMeasurement Temperature Range-20°C to 1000°C (see table of Model Numbers)OutputTwo-wire 4 to 20 mA (loop powered)Maximum Temperature Span1000°CMinimum Temperature Span100°CAccuracy± 1°C or 1%, whichever is greaterRepeatability± 0.5°C or 0.5%, whichever is greaterEmissivity Setting Range0.20 to 1.00 (pre-set to 0.95)Emissivity Setting MethodUser configurable via optional USB / RS-485 adaptersResponse Time, t90240 ms (90% response)Spectral Range8 to 14 μmSupply Voltage12 to 24 V DC ± 5%Minimum Sensor Voltage11.4 V DCMaximum Current Draw25 mA

Additional Information:

  • Delivery Time: Ex-stock

View Complete details

get quote request a call back
  • PyroMini 2.2 series: non-contact temperature sensors for Short wavelengths
  • PyroMini 2.2 series: non-contact temperature sensors for Short wavelengths
PyroMini 2.2 series: non-contact temperature sensors for Short wavelengths

PyroMini 2.2 series: non-contact temperature sensors for Short wavelengths

Price on Request

Product Brochure

Displaydigital
Configurationfixed
Other characteristicsshortwave
Applicationsfor reflective metal
– Backlit touch screen display for temperature indication
– Graph view shows recent temperature history
– Configuration options including 4-20 mA output scaling, averaging, peak/valley hold processing, emissivity and reflection compensation.
– Display turns bright red in alarm condition
– Configurable alarm relay outputs rated 24 V DC, 1 A
– Data logging to MicroSD card – up to 1 year of data at 1 sample per second
– 4 to 20 mA or RS485 Modbus output

View Complete details

get quote request a call back
Fast response immersion sensor

Fast response immersion sensor

Price on Request
AccuracyNTC10k +- 0.2 DegreeC @ 25 DegreeC NTC20k +- 0.2 DegreeC @ 25 DegreeC Pt1000 +- 0.3 DegreeC @ 0 DegreeC Ni1000 +- 0.4 DegreeC @ 0 DegreeC Ni1000
Measuring range50 +120 DegreeC
Probe outer diameter4 mm
MountingR1/2" threads
Material:Stainless steel
Protection class:IP54, cable or probe downwards
Probe length100 mm
Country of OriginMade in India
TEAT immersion sensor is used to sense the liquid temperature in pipes in HVAC systems. TEAT needs to be installed into an immersion pocket. Installation of the device is easy because the screw cover and the terminal blocks are tilted to 45°.

View Complete details

get quote request a call back
Frost guard sensor

Frost guard sensor

Price on Request
Pressure ratingPN16
Dimensions:Probe outer diameter: 4 mm Probe length: 200 mm
MaterialsProbe: acid-proof steel, brass
Measuring range-50 +120 DegreeC
Country of OriginMade in India
TEV frost guard sensor is used to sense the liquid temperature in radiators and pipes in HVAC systems. TEV is a fast response sensor for protecting radiators from freezing.

View Complete details

get quote request a call back
Immersion Temperature Transmitter TEAT LL

Immersion Temperature Transmitter TEAT LL

Price on Request
Temperature measurement range0 50 DegreeC, 0 100 DegreeC, -50 50 DegreeC, -50 150 DegreeC
Temperature measurement accuracy+-0.5 DegreeC
Probe6 x 85 mm
Probe length80 mm
SensorPt1000 EN 60751/B
IP protection classIP54
Power supply15 35 Vdc
Country of OriginMade in India

TEAT temperature transmitters are especially designed for measuring the temperature of heating water. Transmitters are installed in a pocket. Transmitter’s settings can be changed by using the ML-SER tool.

View Complete details

get quote request a call back
ExTempMini  Miniature Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures

ExTempMini Miniature Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures

Price on Request
Maximum DC Input VoltageUi = 28 V
Maximum Input CurrentIi = 93 mA
Maximum Input PowerPi = 0.651 W
Maximum Internal CapacitanceCi = 5.17 nF
Maximum Internal InductanceLi = 1.99 H
  • Temperature range: -20°C to 1000°C
  • Sensing head for use in ambient temperatures up to 180°C
  • ATEX, IECEx and UKEX certified up to Zone 0 (gas)
  • JapanEx certified
  • 4-20 mA output, two-wire, loop-powered
  • Optional RS-485 network adapter and USB configuration tool
  • Supplied with 5 m, 10 m or 25 m sensing head cable
  • Stainless steel 316 housing, ideal for offshore applications
  • Not designed or approved for fever detection

View Complete details

get quote request a call back
PyroMini Miniature Infrared Temperature Sensor with Separate Electronics Module

PyroMini Miniature Infrared Temperature Sensor with Separate Electronics Module

Price on Request
Short-wavelength models100 DegreeC to 2000 DegreeC
Output4-20 mA or RS485 Modbus (Up to 247 sensors may be installed on a single Modbus network)
Repeatability+- 0.5 DegreeC or 0.5% of reading, whichever is greater
Field of ViewChoice of wide-angle or focused optics (see Field of View Diagrams below)
Short-wavelength models+- 2 DegreeC or 1% of reading, whichever is greater
Temperature RangeGeneral purpose models: -20 DegreeC to 1000 DegreeC
  • General-purpose models measure temperatures from -20°C to 1000°C
  • Short-wavelength models for improved accuracy on iron, steel, and high-temperature targets from 100°C to 2000°C
  • 4-20 mA or RS485 Modbus outputs
  • Miniature sensing head and configurable electronics module
  • Touch screen interface (optional)
  • High ambient temperature sensing head option for use in 180°C ambient temperature without cooling
  • Data logging to MicroSD Card (optional)
  • Not designed or approved for fever detection

View Complete details

get quote request a call back
Cable Temperature Sensor

Cable Temperature Sensor

Price on Request
Country of OriginMade in India
TEKY6S senses temperatures in a wide range. It is well protected from the environment by its stainless steel sleeve which is rolled on to a silicone rubber cable. TEKY6S has a high protection rating of IP67.

View Complete details

get quote request a call back
PyroMiniBus  Miniature Pyrometer with RS-485 Modbus for Multi-Channel Systems

PyroMiniBus Miniature Pyrometer with RS-485 Modbus for Multi-Channel Systems

Price on Request
Display2.83" (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
Supply Voltage10 to 30 V DC
Maximum Current Draw100 mA
Ambient Temperature Range0 DegreeC to 60 DegreeC
Relative HumidityMaximum 95%, non-condensing
Alarm Configuration12 alarms (2 per sensor) with adjustable level, individually configurable as HI or LO

– Measure surface temperature from -20 to 1000°C on a variety of target materials, including painted surfaces, paper, plastics, asphalt, food, organic materials, rubber and many more.

– Touch screen terminal for configuration, display, alarms and data logging

– The PyroMiniBus is ideal as a low-cost, standalone 6-channel system, or it can be connected to a larger system using the PM180’s separate Modbus Master and Slave interfaces.

– Connect the PM180 touch screen terminal to another network as a slave device, using its secondary Modbus interface

– Analogue and alarm relay outputs via optional modules

– Conforms to industrial EMC standards

– Robust miniature sensors withstand 120°C ambient temperature without cooling

– Junction box for easy wiring (optional)

View Complete details

get quote request a call back
PyroMiniUSB  Miniature Pyrometer with RS-485 Modbus for Multi-Channel Systems

PyroMiniUSB Miniature Pyrometer with RS-485 Modbus for Multi-Channel Systems

Price on Request
Temperature Range-20 DegreeC to 1000 DegreeC
InterfaceRS-485 Modbus RTU
Repeatability+-0.5% of reading or +-0.5 DegreeC, whichever is greater
Response Time, t90125 ms (90% response)
Accuracy+-1% of reading or +-1 DegreeC, whichever is greater
Spectral Range8 to 14 m
Supply Voltage6 to 28 V DC
  • Miniature non-contact temperature sensor
  • RS-485 Modbus interface
  • Measures temperatures from -20°C to 1000°C
  • For use in ambient temperatures of up to 120°C without cooling
  • Compatible with third-party RS-485 Modbus Master devices, or Calex touch screen interface
  • Not designed or approved for fever detection

PM180 Touch Screen Interface Features :

  • 6-channel temperature display with configuration, alarms and data logging
  • Analogue and alarm relay outputs via optional modules

System Features : 

  • Low-cost standalone 6-channel temperature measurement system
  • Build larger systems using the PM180’s separate Modbus Master and Slave interfaces
  • Connect PyroMiniBus sensors directly to third-party RS-485 Modbus systems

View Complete details

get quote request a call back
  • PyroNFC  Smartphone configurable pyrometer with voltage or thermocouple output  now with iOS app
  • PyroNFC  Smartphone configurable pyrometer with voltage or thermocouple output  now with iOS app
PyroNFC  Smartphone configurable pyrometer with voltage or thermocouple output  now with iOS app

PyroNFC Smartphone configurable pyrometer with voltage or thermocouple output now with iOS app

Price on Request
Temperature Range0 to 1000 DegreeC
Alarm Output- Open collector alarm output with temperature threshold and hysteresis, configurable via NFC
Field of View15:1 (see Field of View Diagram)
Repeatability+- 0.5% of reading or +- 0.5 DegreeC, whichever is greater
Response Time125 ms (90% response)
Temperature Output- Choice of 2 options (see Ordering Information):
  • Temperature range 0°C to 1000°C
  • Analogue Output 0-5 or 0-10 V DC, configurable via app
  • Alarm output (open collector)
  • NFC (Near Field Communication) for temperature measurement and configuration via NFC-enabled smartphones
  • Free Android app: search the Google Play Store for “PyroNFC”

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES