Parshvi Technology (India) Private Limited

Features:

• Fast Switching Response
• High temperature endurable probes
• Single sensor allows pump-control & multi-pointswitching
• Easy calibration with or without material
• Remote electronics with std 10 meters cable length
• External indication LED available
• Threaded , Flanged Mountings & TC
• Electronic Inserts support all requirements
• Ex-proof (Ex d T6 IP-66 IIC)
• Flameproof as per IS/IEC 60079-1:2007
• Weatherproof (IP-66) as per IS/IEC 60529:2001
• Suitable for Gas Group : IIC
• Suitable for Zone 1 & 2 atmospheres
• Compact size
• Rigid rod / flexible rope versions
• No potentiometers - hassle free calibration compensation against material build-up

Application:

• Free flowing homogeneous liquids Like oil, raw water, WFI, DM/DI water etc.
• Suitable for top mounting.
• Suitable for corrosive liquids.

Application:

• Continuous, non-contact level measurement in applicable for liquids and solids in large storage tanks
• Various antennas MOC as per process requirement Maximum measuring range up to 70M

Features:

• Min resolution 1mm
• LCD graphic-capable dot matrix display
• Intelligent signal processing technology
• Simple configuration parameters, without waiting for emptying containers
• Die Cast aluminum enclosure
• Two wire 4-20mA/HART output
• Easy configuration
• Noncontact measuring, no abrasion, no contamination
• Easy installation due to small size of antenna
• Shorter wave length, which can get better reflection for the inclined solid surface.
• Smaller measuring dead zone, which can get better measuring results for small tanks.
• Smaller beam angle, which makes the energy be more concentrated, enhancing the wave reflection ability which can keep signals more powerful to avoid obstacles.
• Almost unaffected by corrosion and foams.

Applications:

• Continuous, non-contact level measurement in fluids, pastes, and coarse bulk materials
• Flow measurement in open channels
• Max-range 30m in liquids

Features:

• Min resolution 1mm.
• LCD display.
• Intelligent signal processing technology.
• Simple configuration parameters, without waiting for emptying containers
• Rot-proof plastic crust protect grade IP67.
• Easy configuration.
• Compact Size
• User Friendly menus
• Temperature Compensation
• Two-wire loop-powered
• Simple Installation & Maintenance
• RS232, RS485, Modbus
• Various output types
• High protection class
• Explosion proof type
• LCD display

Features:

• Cable probe, two optional sensor types: for liquids or solids.
• Single rod probe
• Twin-cable probes
• Sensor for high temperature and high pressure. Single rod probe and coaxial probe are available for option
• PTFE Single rod probe
• Coaxial probe

Application:

• Liquids or solid powders

• Liquids
• Solid powders and low dielectric constant liquids.
• Corrosive liquids
• Liquids with lower dielectric constant or liquids with wavy surface, best choice for measurement of storage tank with complicated inner structure

Application:

• Free flowing homogeneous liquids like oil, raw water, WFI, DM/DI water etc
• Suitable for top mounting

Features:

• Fast Switching Response
• High temperature endurable probes
• Single sensor allows pump-control & multi-point switching
• Easy calibration with or without material
• Remote electronics with std 10 meters cable length
• External indication LED available
• Threaded , Flanged Mountings & TC
• Electronic Inserts support all requirements
• Ex-proof (Ex d T6 IP-66 IIC) : Flameproof as per IS/IEC 60079-1:2007, Weatherproof (IP-66) as per IS/IEC 60529:2001, Suitable for Gas Group: IIC, Suitable for Zone 1 & 2 atmospheres
• Compact size
• Rigid rod / flexible rope versions
• No potentiometers – hassle free calibration compensation against material build-up.

Pressure transmitter with display, programmable by NFC/RFID technology

DST400 series integrates process reading and visualization with analogue retransmission of pressure value, allowing also to manage two activation thresholds by means of two PNP outputs. 

 

This transmitters stands out in its product segment thanks to innovative and unique features: programming by NFC/RFID technology, independent rotation of display and electrical connector, selection of the analogue output by parameter as mA or Volt, scalability of measuring range till 50% of the nominal scale, integrated datalogger with programmable sampling time. 

 

For high pressure ranges the transmitter is available also with thin film on steel sensor for increased resistance to pressure peaks.  

Main features

 

Box93 x 37 mmPower supply15..30 VDCPower consumptionMax 0,6 WOperating conditionsTemperature -25..+85 °C, humidity 35..95 RH%MaterialSensor housing: galvanised steel; display housing: polycarbonateWeightApprox. 189 gSealingIP67 - FPM, NBR, EPDM

Additional Information:

• Delivery Time: Ex-stock

Application:

• TLH is a pressure sensor for hydrostatic level measurement.
• Drinking water, dam water, bore well, well etc.
• Suitable for top mounting.
• Process temperature max. 80 ºc.
• Process pressure max. 200 mH2O.
• Suitable for corrosive liquids.

Features:

• Compact size.
• 4-core, shielded cable with vent hose which is mechanically strong enough for deep submersible liquid level measurements.
• Wide range industrial dc power supply (12 to 36 VDC).
• Loop powered device (true-two wire).
• No calibration required.
• Customized process connections.like Threaded/Flanged/Hygienic etc.