Product Details:
Model Name/Number | CD |
Brand | Filsa |
Maximum Pressure | +0.5 bar |
Maximum Voltage | 250 V AC |
CD Standard Ambient Temperature | -20 to +60 Deg C |
CD with Aluminium Housing Ambient temperature | -25 to +80 Deg C |
Protection | IP53 / IP40 depending on the position of the cable gland |
CD Standard Weight | 0.48 kg |
Versatile membrane level indicator. Is to be used to control the maximum or minimum level of bulk solids in silos or vessels. These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.
The membrane must to be exposed to the material. The movement of the switch is the result of the pressure exerted by the incoming bulk material against the membrane which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.
The models “A-100”, “AD”, “SR” y “CD2M” and the models with S.S. membrane have a regulation system by a spring that allows the adjustment of the sensitivity. Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.
The models are adjusted at their maximum sensitivity. It is necessary to ensure the proper pressure to the membrane that returns the membrane when there is no product covering it.
Drill holes in the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the easy flow of the material and ensure that the product leaves the membrane without product on it.
Product Details:
Model Number | LMC |
Brand | Trumen |
Process Temperature | -20 to 100 DegreeC (-4 to 212 DegreeF) |
Min. Dielectric Constant | 1.6 (non-hygroscopic) |
Ambient Temperature | -20 to 70 DegreeC (-4 to 158 DegreeF) |
PTFE Insulation Extended Process Temperature | -30 to 250 DegreeC (-22 to 482 DegreeF) |
Ceramic Insulation Extended Process Temperature | -30 to 600 DegreeC (-22 to 1,112 DegreeF) (extensions & heat sinks required) |
Process Pressure | Absolute / max. 15 bar |
Additional Information:
Product Details:
Usage/Application | Industrial |
Model Name/Number | LFV 12 |
Brand | Trumen |
Process Temperature | -20 to 80 DegreeC (-4 to 176 DegreeF) |
Max. Viscosity | 10,000 cStokes (= cPose/(g/cm3)) (Higher viscosity available on request) |
Ambient Temperature | -20 to 70 DegreeC (-4 to 158 DegreeF) |
Extended Process Temperature | -30 to 150 DegreeC (-22 to 302 DegreeF) (extensions & heat sinks required) |
Process Pressure | Absolute / max. 15 bar |
Application:
Product Details:
Model Name/Number | LFV |
Brand | Trumen |
Process Temperature | -20 to 80 DegreeC (-4 to 176 DegreeF) |
Max. Viscosity | 10,000 cStokes (= cPose/(g/cm3)) (Higher viscosity available on request) |
Ambient Temperature | -20 to 60 DegreeC (-4 to 140 DegreeF) |
Extended Process Temperature | -30 to 200 DegreeC (-22 to 392 DegreeF) (extensions & heat sinks required) |
Process Pressure | Absolute / max. 15 bar |
Wetted Parts | SS 316 or SS 316L,PTFE,PFA,TEFZEL,HALAR |
Product Details:
Mounting Options | Side Mount, Top Mount |
Brand | Trumen |
Model Name/Number | LSVR |
Usage/Application | Industrial |
Min. Density | More Than 350 gram/litre,not fluidized |
Ambient Temperature | -20 to 70 DegreeC (-4 to 158 DegreeF) |
Process Temperature | -20 to 80 DegreeC (-4 to 176 DegreeF) |
Extended Process Temperature | -30 to 250 DegreeC (-22 to 482 DegreeF) (extensions & heat sinks required) |
Product Details:
Model Name/Number | LSV |
Brand | Trumen |
Material/Body | SS |
Process Temperature | -20 to 80 DegreeC (-4 to 176 DegreeF) |
Ambient Temperature | -20 to 70 DegreeC (-4 to 158 DegreeF) |
Extended Process Temperature | -30 to 200 DegreeC (-22 to 392 DegreeF) {250 DegreeC available on request} |
Length | 125 to 3000 mm |
Wetted Parts | SS 316 or SS 316L |
Product Details:
Model Name/Number | LSR |
Operating Temperature | -20 to 80 DegreeC (-4 to 176 DegreeF) |
Brand | Trumen |
Ambient Process Temperature | -30 to 100 DegreeC (-22 to 212 DegreeF) (extensions & heat sinks required) |
Pressure | Atmospheric |
Blade Material | SS 316 or SS 316L |
Max Length | 100 to 1000 mm |
Blade Thickness | 2 mm |
Application:
Product Details:
Model Name/Number | LFV-11 |
Brand | Trumen |
Process Temperature | -20 Degree C- 80 Degree C (-4 Degree F-176 Degree F) |
Supply | 12 to 60 VDC |
Process Temperature Max | 150 Degree C |
Process Pressure Max | 15 Bar |
Output Limit | 250mA max. Short Circuit Safe. |
Max. Viscosity | 10,000 cStokes (= cPose/(g/cm3)) (Higher viscosity available on request) |
Product Details:
Mounting Options | Side Mount, Bottom Mount |
Media Type | Dry Material |
Packaging Type | Box |
Brand | FILSA |
Enclosure | IP65 according DIN EN60529 |
Model | AD INOX |
Maximum Pressure | +0.5 bar |
Maximum Voltage | 250 V AC |
Intended use:
Membrane level indicator with Stainless Steel membrane to be used to control normally the minimum level of bulk solids in silos or vessels.
These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.
Function:
The membrane must to be exposed to the material.The movement of the switch is the result of the pressure exerted by the incoming bulk material against the membrane which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.
The models "A-100", "AD", "SR" y "CD2M" and the models with S.S. membrane have a regulation system by a spring that allows the adjustment of the sensitivity. Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.
The models are adjusted at their maximum sensitivity. It is necessary to ensure the proper pressure to the membrane that returns the membrane when there is no product covering it.
Mechanical connection:
Drill holes in the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the easy flow of the material and ensure that the product leaves the membrane without product on it.
Product Details:
Model Name/Number | LWS |
Brand | Trumen |
Process Temperature | -20 to 100 DegreeC (-4 to 212 DegreeF) |
Min Conductivity | 20 uSiemens |
Ambient Temperature | -20 to 60 DegreeC (-4 to 140 DegreeF) |
Extended Process Temperature | -30 to 200 DegreeC (-22 to 392 DegreeF) (extensions & heat sinks required) |
Process Pressure | Absolute / max. 5 bar |
Wetted Parts | SS-304, SS-316, SS-316L, PTFE, part ceramic |
Product Details:
Mounting Options | Top Mount |
Switch Type | Reed Switch (SPST/SPDT) |
Model Name/Number | MLS20 |
Brand | Trumen |
Float Diameter | 30,52,60 mm |
Process Connection | Flange / Thread |
Maximum Pressure | Up to 20 Kg/cm2 |
Mac. Temperature | Up to 150 Degree C, others on request |
Product Details:
Process Temperature | -20 to 100 DegreeC (-4 to 212 DegreeF) |
Brand | Trumen |
Ambient Temperature | -20 to 60 DegreeC (-4 to 140 DegreeF) |
Extended Process Temperature PTFE Insulation | -30 to 250 DegreeC (-22 to 482 DegreeF) |
Extended Process Temperature Ceramic Insulation | -30 to 600 DegreeC (-22 to 1,112 DegreeF) (extensions & heat sinks required) |
Wetted Parts | SS-304, SS 316, SS-316L, PTFE, part ceramic |
Rigid Rod Probe Insertion Length | 50 to 3000 mm |
Flexible Rope Probe Insertion Length | 100 to 20000 mm |