6-patterns,16-steps Program control of up to 256 steps is possible by linking patterns.
Degree of Protection
IP66 (for front panel only)
100 to 240 VAC or 24 AC/DC
Relay contact 1a1b,Non-contact voltage (for SSR drive),Direct current: 4 to 20 mA DC
0 to 10 mV DC,-10 to 10 mV DC,0 to 50 mV DC,0 to 100 mV DC,0 to 1 V DC
Control Output Capacity
Relay Contact: 3 A 250 V AC (resistive load),1 A 250 V AC (inductive load cos=0.4)
Model Name/ Number
Time Setting Accuracy
+- 0.1% of setting time
Input Sampling Period
Program capacity with 16-patterns, 16-steps: Program capacity: 16-patterns, 16-steps Program control of up to 256 steps is possible by linking patterns.
Easily legible LCD display with 11-segment characters: 11-segment character LCD display is used, so characters can be read easily.
PV color changes linked with alarm: PV color changes: Orange, Green, Red, When any alarm is ON: Green --> Red, When any alarm is ON: Orange --> Red, or PV color changes by deviation between PV and SV. Errors can be also checked via action indicators.
Backlight indication time: By setting backlight time (from no operation status until backlight is switched off), displays can be turned off, resulting in energy savings.
Efficient Console software: Console software (SWC-PCA101M) is available for data monitoring, editing, loading, etc.Power to the PCA1 is not required if USB communication cable (CMB-001) is used.
Easy-viewing data via Monitoring software: By using the Monitoring software (SWM-PCA101M), setting item change, data logging and monitoring can be carried out on a PC.
Enhanced serial communication function: Communication protocol: Shinko protocol, Modbus ASCII , and Modbus RTU Modbus ASCII, Modbus RTU: A maximum of 100 pieces of multiple data Read/Write is possible.
Drip-proof/Dust-proof structure: IP66 (for front panel only), usable in harsh environments where dust is present or water splashes.
0 to 10000 times (Repetitions disabled when set to 0.)
Program capacity: 10-patterns, 10-steps/pattern:Program capacity with 10-patterns, 10-steps/pattern Using pattern link function, up to 100 steps of program control can be carried out.
Easier viewing large display:11-segment character LCD display is used, so characters can be read easily.
Power supply and quick setup using the Tool cable and USB cable:Initial settings can be easily performed from a PC using the Tool cable and USB cable. If the Tool cable (CMD-001, sold separately) is used, the power can be supplied to the PCB1 (from USB terminal of a PC).
Drip-proof/Dust-proof structure:IP66 (for front panel only), usable in harsh environments where dust is present or water splashes.