Call 08048971769 95% Response Rate

our range

Dust Monitor

A qualitative dust measurement, for example by triboelectric filter monitoring, includes both the monitoring of the clean gas dust content after dust collectors as well as the evaluation of the status of the exhaust gas cleaning systems.The signal generation is based on the triboelectric measuring principle. In other words the charge exchange between the probe and the streaming as well as the bouncing dust particles is carried out.
According to the triboelectric measuring principle the filter monitoring device will be installed as in-situ measuring device in the clean gas pipes after the dust collectors. Devices are suitable for monitoring baghouse-, envelope- and cartridge filters and centrifugal separators (cyclones) There are more than 10,000 pcs of Dr. Födisch AG filter monitor devices operating worldwide i.a. in the food processing or cement industries, in the metal- and woodworking and chemical industries.
  • Broken Bag Detector PFM13C
  • Broken Bag Detector PFM13C
Broken Bag Detector PFM13C

Broken Bag Detector PFM13C

Rs 1.1 Lakh  / PieceGet Best Price

Product Brochure

Model Name/NumberPFM 13
BrandDr. Fodisch GmbH
DimensionsApprox. 100 mm x 120 mm x 530/730 mm
WeightApprox. 1.0 kg
Measuring Gas TemperatureMax. 280 DegreeC
Flow VelocityMin. 3 m/s
Measuring Range of Dust0 - 100% (qualitative)
Ambient Temperature-20 to +50 DegreeC
Power Supply2-wire transmitter (4...20 mA); min. 15 V DC / max. 30 V DC
The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device it can be used as a filter monitoring device as well as a dust measuring device.

Application:
  • The PFM 13 serves the permanent control of dust emissions. Applied as filter monitoring device it is an effective implement to detect and localise damages at filtering precipitators at early stage. Configured as dust measuring device it can be used for continuous monitoring of clean gas contents and dust contents of filtering precipitators.
  • By the device visible and invisible exhaust plumes can be avoided. The monitoring furthermore enables directed maintenance procedures and serves the avoidance of product losses.

Highlights of the device:
  • Dust measurement and filter monitoring with one compact device
  • Local diagnosis of system state by integrated graphic display
  • No separate power supply necessary (2-wire transmitter)
  • No purge air blower required
  • Low operational costs
  • Easy mounting
  • First-class price-performance ratio

Functions:
The measurement with the PFM 13 is carried out via the tribo-electric measuring method. For that matter the measuring gas in the exhaust gas flow is gathered by means of the probe rod. By the passing as well as impinging dust particles a charge exchange takes place between these and the probe rod. From the discharged current a signal is generated which depends on the mechanical and electrical characteristics of the dust. The dust-proportional signal which is generated by the microcontroller integrated in the device is the degree for the dust content of the exhaust.

View Complete details

get quote request a call back
Dust Monitor PFM 13 C

Dust Monitor PFM 13 C

Rs 1.1 Lakh  / PieceGet Best Price

Product Brochure

Model Name/NumberPFM 13 C
BrandDr. Fodisch GmbH
DimensionsApprox. 100 mm x 120 mm x 530/730 mm
WeightApprox. 0.9 kg
Power Supply2-wire transmitter (4 - 20 mA); min. 15 V DC / max. 30 V DC
Ambient Temperature-20 to +50 DegreeC
Measuring Gas TemperatureMax. 280 Degree C
Flow VelocityMin. 3 m/s
HousingCompact device; IP 65; protection class 1
The PFM 13 C is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device it can be used as a filter monitoring device as well as a dust measuring device.

Application:
  • The PFM 13 C serves the permanent control of dust emissions. Applied as filter monitoring device it is an effective implement to detect and localise damages at filtering precipitators at early stage. Configured as dust measuring device it can be used for continuous monitoring of clean gas contents and dust contents of filtering precipitators.
  • By the device visible and invisible exhaust plumes can be avoided. The monitoring furthermore enables directed maintenance procedures and serves the avoidance of product losses.

Features:
The measurement with the PFM 13 C is carried out via the tribo-electric measuring method. For that matter the measuring gas in the exhaust gas flow is gathered by means of the probe rod. By the passing as well as impinging dust particles a charge exchange takes place between these and the probe rod. From the discharged current a signal is generated which depends on the mechanical and electrical characteristics of the dust. The dust-proportional signal which is generated by the microcontroller integrated in the device is the degree for the dust content of the exhaust.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES