Parshvi Technology (India) Private Limited
Parshvi Technology (India) Private Limited
Mahadev Nagar Tekra, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL

Pressure

Distributor / Channel Partner of a wide range of products which include differential pressure and air velocity meter, beck differential pressure switch, beck differential pressure transmitter, pressure transmitter, differential pressure transmitter - r8 series and differential pressure transmitter.

Differential Pressure And Air Velocity Meter

Differential Pressure And Air Velocity Meter
  • Differential Pressure And Air Velocity Meter
  • Differential Pressure And Air Velocity Meter
  • Differential Pressure And Air Velocity Meter
  • Differential Pressure And Air Velocity Meter
Get Best Quote
Approx. Price: Rs 35,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ConditionRefurbished
Weight400 g
ModelEMA 200
Air Velocity1.5 ..180 m/ s
Battery Voltage9 V
ApplicationIndustrial
Power Requirement9V Battery
Accuracy0.5
Model NumberEMA200
Usage/ApplicationYou can measure Low differential Pressure across Bag filters,Duct line,Low air pressure line
DisplayLCD
BrandHalstrup-Walcher

EMA200

Portable digital pressure gauge for measuring differential pressures and flow rates.

Special features

High level of accuracy and long-term stability Little zero point drift or hysteresis; largely independent of temperature Available for 4 measuring ranges Scalable analog output Zero-point calibration at the touch of a button eliminates the dependence of the display on its location Stores min. and max. values Flow-rate display Can be calibrated

The EMA 200 is a portable, battery-powered digital pressure gauge for precise measurement of positive and negative differential pressures. Because it is easy-to-use, the EMA 200 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters and measuring fireplace drafts as well as measuring flow rates and determining volumetric flows. The instrument is available with an ISO factory calibration or DAkkS calibration certificate.

The EMA 200 can be ordered in 4 different measurement ranges. The units can be changed as required: Pa and kPa are shown in the display; mbar, mmH2O, and in H2O are printed on the housing film and marked with an arrow. The temperature or rate of flow is shown in a second line on the display.

The EMA 84 can also be ordered with 4 different measurement ranges. The following units may be selected: Pa/mbar and mbar/kPa.

Technical Benefits:

 

1. You can measure Low differential Pressure across Bag filters, Duct line, Low air pressure line.

2. You can measure positive and negative pressure both in single instrument.

3. you can measure velocity through Telescopic Pitot Tube (Minimum Working length 300 mm to Maximum Working length 980 mm) so one instrument all velocity measurement application.

5. With Calibration Certificate as German ISO 9001 Norms

6. Higher Accuracy level (0.5% FS)

7. Made in German Engineering

8. Adjustable pitot factor and density

9. Zero-point correction at the push of a button

10. Min. / max. value memory

11. Temperature measurement
12. 2 year Warranty

Request
Callback


Additional Information:

  • Item Code: EMA200
Yes! I am Interested
View PDF

BECK Differential Pressure Switch

BECK Differential Pressure Switch
  • BECK Differential Pressure Switch
  • BECK Differential Pressure Switch
  • BECK Differential Pressure Switch
  • BECK Differential Pressure Switch
Get Best Quote
Approx. Price: Rs 1,250 / PieceGet Latest Price

Product Details:

Minimum Order Quantity10 Piece
Enclosure RatingIP54
Pressure Range20 .... 5000 Pascal
Media TypeGas
BrandBECK
Model No.930.8x
ApplicationMonitoring air filters and ventilators  Monitoring industrial cooling-air circuits  Overheating pr
Usage/ApplicationAir filters, ventilators, fan heaters, ventilation ducts monitoring
DiaphragmSilicone
EnclosureIP54
Protection ratingIP54
Sensing ElementSilicone
Weight150 gram
Minimum Order Quantity10 Piece
Enclosure ProtectionIP54

The adjustable differential pressure switches 930.8x

Applications:

Adjustable differential pressure switch for monitoringoverpressure, vacuum and differential pressure of air or othernon-combustible, non-aggressive gases.

Possible fields of application include:

· Monitoring air filters and ventilators· Monitoring industrial cooling-air circuits· Overheating protection for fan heaters· Monitoring flows in ventilation ducts· Controlling air and fire-protection flaps· Frost protection for heat exchangers

The switching pressure can be adjusted without a manometer at the adjustment knob with the guide value scale. Various versions are available for this with overlapping adjustment ranges of between 0.2 mbar and 50 mbar. The pressure switch is equipped as standard with a transparent cover, protection class IP54.

Maximum operating pressure: 10 kPa for all pressure ranges

Medium: Air, non-combustible and non-aggressive gases

Temperature range: Medium and ambient temperature from –20°C to +85°C

Storage temperature: –40°C to +85°C

Diaphragm material: Silicone, tempered at 200°C, free of gas emissions, Other materials available on request.

Pressure connections:2 plastic pipe connection pieces (P1 and P2),

externaldiameter 6.0 mm

P1 for connection to higher pressure (marked +)P2 for connection to lower pressure (marked –)

Housing materials: Switch body and cover of plastic

Weight: with cover 150 g, without cover 110 g

Mechanical working life: Over 106 switching operations

Electrical rating:Standard version: max. 1.5 A (0.4 A) / 250 VAC

Low-voltage version: max. 0.1 A / 24 VDC

Electrical connections: AMP flat plug 6.3x0.8 mm in accordance with DIN 46244 or push-on screw terminals, Cable conduit with cable strain relief.

Protection category: IP 54 with cover, IP 00 without cover

CE Conformity: each depending on technical specification: Low Voltage Directive 2006/95/EC; RoHS Directive 2011/65/EC;Gas Appliance Directive 2009/142/EC;ATEX- Directive 2014/34/EC; ANSI UL508; CSA.

Specifications according to EN1854Class of control and regulation function: ADeviation: ≤±15 %, min. ±10 PaDrift: ≤±15 %

Pressure ranges:

20 to 200 Pascal (0.2 to 2.0 mbar) 20 to 300 Pascal (0.2 to 3.0 mbar)30 to 400 Pascal (0.3 to 4.0 mbar) 50 to 500 Pascal (0.5 to 5.0 mbar) 200 to 1000 Pascal (2.0 to 10.0 mbar) 100 to 1000 Pascal (1.0 to 10.0 mbar) 500 to 2500 Pascal (5.0 to 25.0 mbar) 1000 to 4000 Pascal (10 to 40 mbar) 1000 to 5000 Pascal (10 to 50 mbar)

Adjustment knob scale in: mbar, Pascal / Pascal and inWC

Request
Callback


Additional Information:

  • Item Code: 930.8X
  • Delivery Time: Ex-stock
Yes! I am Interested
View PDF

Beck Differential Pressure Transmitter

Beck Differential Pressure Transmitter
  • Beck Differential Pressure Transmitter
  • Beck Differential Pressure Transmitter
  • Beck Differential Pressure Transmitter
Get Best Quote
Approx. Price: Rs 10,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Model Number/Name985
Output Voltage0-10 V or 4-20 mA
BrandBECK
Power Supply24 VAC / VDC
Display TypeLED-display,4 digits
Output Signal4 ... 20 mA or 0 ... 10 V,3-wire
Media Typegaseous,non-combustible and non-aggressive media
ApplicationDifferential pressure monitoring across the filters,Duct static pressure,Clean room pressure
Input Voltage18...30 VDC
Ip Rating65
Electrical Connectionvia plug-in terminals with cap nut conduit AF15
Application/UsageMonitoring of gaseous,non-combustible and non-aggressive media
Product Weight140 g
Protection TypeIP65

The differential pressure transmitter for air with IP65

The differential pressure transmitters of the 985 series are used to measure differential pressure, overpressure and vacuum.They provide up to 8 pressure ranges and 2 output signals,which are easily selectable by jumper or rotary selector switch.
Configurable pressure range For an optimum adaptation to the application, the transmitter can be switched between various pressure ranges. The factory setting is the most sensitive range. For the series 985M and 985A the less sensitive second range will be selected by simply removing a jumper. For the series 985Q the available eight ranges can be selected by a rotary selector switch.

Output signal selection: The output signal of the 3-wire version can be changed between0 ...10 Volt and 4 ... 20 mA by removing a jumper. The series985M is also available in a 2-wire version with 4 ... 20 mA outputsignal.

Applications: Monitoring of gaseous, non-combustible and non-aggressive media.

Possible usage areas are:

· Building automation and air conditioning systems
· Overpressure measurement in clean rooms and laboratories
· Measurement of constant pressure in VAV applications
· Dynamic filter and ventilator monitoring
Request
Callback


Additional Information:

  • Item Code: 985
Yes! I am Interested
View PDF

BECK Differential pressure transmitter

BECK Differential pressure transmitter
  • BECK Differential pressure transmitter
  • BECK Differential pressure transmitter
  • BECK Differential pressure transmitter
  • BECK Differential pressure transmitter
Get Best Quote
Approx. Price: Rs 4,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity60 Piece
Accuracy0.5%
ApplicationBuilding automation, air conditioning systems and clean room, Filter, ventilator monitoring
ApplicationsBuilding automation, air conditioning systems and clean room monitoring
BrandBECK
Enclosure RatingIP54
Mediagaseous, non-combustible and non-aggressive
Media Typeof gaseous, non-combustible and non-aggressive media
Model Number/Name982R
Output Voltage0-10 V
Power Supply24 VAC or VDC
Product Weight50 g
Protection TypeIP54
Rated Supply Voltage18 ... 30 VAC/DC
Response Time0,1 - 1,0 s
Usage/ApplicationBuilding automation, air conditioning systems and clean room monitoring

OEM Differential Pressure Transmitter 982R

General description:

The differential pressure transmitters of the 982R series areused to measure differential pressure, overpressure andvacuum. They provide one adjustable pressure range andone output signal.

Applications: Monitoring of gaseous, non-combustible and non-aggressive media.

Possible usage areas are:
· Building automation, air conditioning systems and cleanroom monitoring
· Valve and flap control
· Filter, ventilator and blower monitoring· Control of air flows

Adjustable pressure range:

The end of the pressure range can be reduced to 50% of itsfactory set full scale value simply by the use of a push-button.

Output signal: 0 ... 10 V or 4 ... 20 mA. Other signals on request

Easy offset calibration:

The output signal can be calibrated to zero by pressing thepush-button (pressure transmitter must be depressurised).

Configurable response time:

The response time of the output signal can be configured usinga jumper. If the jumper is in place the response time is slow(factory setting), which is useful for suppressing brief pressurepeaks. If the application requires a fast response time thejumper must be removed.

Reset: The transmitter can be reset to its factory setting, just bypressing the push-button for >10 sec.

Measuring method: Piezoresistive pressure transducer

Mounting position: Can be mounted in any position. The zero offset calibration eliminates any possible position error.

Request
Callback


Additional Information:

  • Item Code: 982-R
  • Packaging Details: 60 piece in 1 Box
Yes! I am Interested
View PDF

Pressure Transmitter

Pressure Transmitter
  • Pressure Transmitter
  • Pressure Transmitter
  • Pressure Transmitter
  • Pressure Transmitter
Get Best Quote
Approx. Price: Rs 5,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity50 Piece
BrandBECK
ApplicationIndustrial
ConditionNew
Measuring Ranges0-100 mbar
Model Number/Name981
Power Supply24 VDC
Protection TypeIP54
Usage/Applicationover pressure, vacuum or differential pressure of liquid and gaseous, also aggressive media

Pressure Transmitter for Low pressure measurement

Application:
Analogue pressure transmitter monitoring overpressure,vacuum or differential pressure of liquid and gaseous– also aggressive – media.

Temperature range:
Ambient temperature from –20°C bis +85°C.Temperature of media up to 85° C depending onmaterial of pressure connection and diaphragm.

Diaphragm material:
Depending on media: NBR, Silicone, FKM (Viton®), EPDM.Others upon request.

Pressure range:
0 … 100 mbar. Others upon request.
Maximum operating pressure 500 mbar

Supply voltage: 24 VDC

Output signal: 3-wire; 0 - 10 VDC2-wire; 4 - 20 mA

Electrical connection: AMP connection M12; 4-pole

Linearity error: < ± 1% FSO BFSL @20°C

Load: Min. 10 kΩ

Current draw: < 20 mA

Response time: 500 ms

Weight: Approx. 100 g

Protection class: IP54 according to EN 60529

CE Conformance: RoHS Directive 2011/65/EU

Mounting position:Mounting in any position

Request
Callback


Additional Information:

  • Item Code: 981
Yes! I am Interested
View PDF

Differential Pressure Transmitter - R8 Series

Differential Pressure Transmitter - R8 Series
  • Differential Pressure Transmitter - R8 Series
  • Differential Pressure Transmitter - R8 Series
  • Differential Pressure Transmitter - R8 Series
Get Best Quote
Approx. Price: Rs 6,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity10 Piece
Media TypeDry air or non-aggressive gases
Warranty5 YEAR
Ip Rating54
BrandH K INSTRUMENTS
ApplicationPressure and flow - fan, blower and filter monitoring
Application/Usagefan, blower and filter monitoring
MediaDry air or non-aggressive gases
Supply24 VAC or VDC
Model Number/NameDPT-R8
Display2-line display (12 characters/line)
Enclosure RatingIP54

Field adjustable, multi-range differential pressure transmitters for air

DPT-R8 series differential pressure transmitters are engineered for building automation in the HVAC/R industry. The most technologically advanced transmitters on the market measuring static and differential pressure, with field selectable units, range and output, all in a single device.

DPT-R8 series devices include: (Ex. ±25, ±50, ±100, ±150 Pa, 25, 50, 100, 250 Pa)

• Multiple measurement units, field selectable via jumper, including: inWC, mmWC, Pa, mbar.

• 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper.

• Proportional output options including: voltage (0–10 V) and current (4–20 mA).

DPT-R8 series device options offer:

• AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy

• Backlit display

• Field adjustable span point calibration (i.e. gain)

 

Technical details:

 

Accuracy:

Pressure < 125 Pa = 1 % + ±2 Pa

Pressure > 125 Pa = 1 % + ±1 PaAccuracy:

(model 7000)Pressure< 125 Pa = 1.5 % + ±2 Pa

Pressure > 125 Pa = 1.5 % + ±1 PaZero point calibration:automatic with autozero element (-AZ) or by pushbuttonMeasuring units:Pa, kPa, mbar, inchWC, mmWC, psiMeasuring element:MEMS, no flow-throughSupply voltage:24 VDC ±10 % / 24 VAC ±10 %Power consumption:< 1.0 W (< 1.2 W with output current 20 mA)Output signals (3-wire):0…10 VDC, Load R minimum 1 kΩ

4…20 mA, maximum load 500 ΩOperating temperature:-20…+50 °C (with autozero calibration -5...+50 °C) -40…+50 °C (-40C model)Response time:0.8 / 8 sProtection standard:IP54inWC models: ETL marking, standard IEC61010-1

Request
Callback


Additional Information:

  • Item Code: DPT-R8
Yes! I am Interested
View PDF

Differential Pressure Transmitter

Differential Pressure Transmitter
  • Differential Pressure Transmitter
  • Differential Pressure Transmitter
  • Differential Pressure Transmitter
Get Best Quote
Approx. Price: Rs 13,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandHALSTRUP-WALCHER
Ip Rating65
ProtectionIP65
Protection TypeIP65
Usage/ApplicationBag filter, Pollution control equipment, Furnace Draft pressure (Suction pressure) measurement

Compact differential pressure transmitter PS27


This compact differential pressure transmitter is particularly suited to filter and pressure monitoring applications in the heating, air-conditioning and ventilation industries. An optional display allows measurement values to be read directly on-site in Pa or kPa. An optional time constant (up to 4s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. To reduce wiring costs, the instrument is also available in a version with two-wire technology (optional). The PS 27 can be mounted either on a wall or on top-hat rails. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Features:
  • For high-end cleanroom applications (PUC 44 - 3)
  • Suitable for top-hat rail mountingand wall surface installation
  • Selectable output signal 0/2 .. 10 V, 0/4 .. 20 mA or 0 .. 5 V
  • Selectable attenuation of the output signal of up to 4 s (optional)
  • Display (optional)
  • Can be calibrated
  • Zero-point calibration via an external signal reduces maintenance costs
  • The adjustable limit switch permits the connection of, e.g. ventilators or signalling devices, and saves additional wiring (optional)
Technical Data:
Measurement ranges50 / 100 / 200 / 500 Pa1 / 2.5 / 5 / 10 / 20 / 50 / 100 kPa

optional:
toggles between: 100 Pa / 250 Pa / 500 Pa / 1000 Pa
toggles between: 250 Pa / 500 Pa / 1000 Pa / 2500 Pa
toggles between: 1 kPa / 2.5 kPa / 5 kPa / 10 kPa
toggles between: 10 kPa / 25 kPa / 50 kPa / 100 kPa

Output: 0 .. 10 V (R L ≥ 50 kΩ)
2 .. 10 V (R L ≥ 50 kΩ)
0 .. 20 mA (R L ≤ 500 Ω)
4 .. 20 mA (R L ≤ 500 Ω)
0 .. 5 V (R L ≥ 50 kΩ)
(the output signal can be configured using jumpers)

Power supply:24 VAC/DC, ± 10 % (without galvanic separation) and 15 .. 32 VDC (two-wire) (only for 4 .. 20 mA Output)

Contact point (optional, not for two-wire):1 relay (changeover contacts) max. 230 V AC, 6 A (min. required switching capacity 300 mW)

Display (optional): 4-digit, LCD
Request
Callback


Additional Information:

  • Item Code: PS27
Yes! I am Interested
View PDF

DIN Rail Mount Differential Pressure Transmitter

DIN Rail Mount Differential Pressure Transmitter
  • DIN Rail Mount Differential Pressure Transmitter
  • DIN Rail Mount Differential Pressure Transmitter
  • DIN Rail Mount Differential Pressure Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/ApplicationCleanroom, Surgeon control panel, BMS/HVAC, Process, Air flow station
Output Voltage0..10 V
Accuracy0.2%
Output Signal4 ... 20 mA
Weight450 g
Power Supply24 VAC/DC
Media Typeair, all non-aggressive gases
Enclosure RatingIP20
Model Number/NameP34
BrandHalstrup-Walcher

Differential Pressure Transmitter-Din rail mounting P34

The P 34 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows. The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 34 can be mounted on top-hat rails.

Features:
Measurement of differential pressure, volume flow or P-/T-compensated volume flow (optional) possibleVolume flow can be configured via k-factor, dPmax/Vmax or 20 individual valuesScaling, characteristic line form and many other parameters can be set via PC-software (optional)With USB interface 2 floating switching relays (optional)Output signal can be configured 0 .. 10 V or 0/4 .. 20 mACalibration of the zero point Can be calibratedSuitable for top-hat rail mounting in control cabinetsDelivery possible already completely integrated into the control cabinet (on request)Technical Data:

Measurement ranges:
10 / 50 / 100 / 250 / 500 Pa1 / 2,5 / 5 / 10 / 20 / 50 / 100 kPafreely scalable from 10 .. 100 % within a measurement range (others available on request)Optionally also for the measurement of P-/T-compensated volume flow

Margin of error:
± 0,2 % or ± 0,5 % of the scaled range (40 .. 100 % of max. value, min. 0.3 Pa)

Output (rad. / lin.):0 .. 10 V (RL ≥ 2 kΩ)0 .. 20 mA (RL≤ 500 Ω)4 .. 20 mA (RL≤ 500 Ω)(output signals can be configured freely)

Power supply:
24 VAC/DC, ± 10 %

Tubing connectors:
standard grommet for NW 4..6 mm tubingthreaded elbow connector for 6 mm tubing

Interface:
USB 2.0 Full-Speed Slave (Mini USB)

Request
Callback


Additional Information:

  • Item Code: P34
Yes! I am Interested
View PDF

Differential Pressure Transmitter

Differential Pressure Transmitter
  • Differential Pressure Transmitter
  • Differential Pressure Transmitter
  • Differential Pressure Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/Application(air-conditioning, cleanroom, process
Output Voltage0..10 V
Accuracy0.2%
Display Typemulti-coloured LCD and keyboard
Supply24 VAC/DC
Weight750 g
Media Typeair, all non-aggressive gases
Net Weight750 g
Enclosure RatingIP65
BrandHalstrup-Walcher

High precision differential pressure transmitter P26


Differential pressure transmitter with scalable measuring range and a high level of overpressure protection

The P 26 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows.

The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. This can also be performed using a keyboard and display (optional). The measured values can be displayed in all standard units. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 26 can be mounted either on a wall or on top-hat rails

Special features:

  • High level of accuracy and long-term stability through automatic zero-point calibration
  • Measurement of differential pressure or volumetric flow / flow rate possible
  • Easy configuration of the measuring range, analog output, time constants and units via PC or keyboard (optional)
  • USB interface (optional)
  • Display with keyboard for configuration of the pressure transmitter (optional)
  • Multilingual menu (English/German/Italian/French)
  • Suitable for top-hat rail mounting and wall surface installation
  • 2 floating switching relays (optional)
  • Integrated power adapter for 115/230 VAC power supply
  • Silicon-free materials for parts in contact with medium
  • Output signal can be configured 0 .. 10 V, 0/4 .. 20 mA or ± 5 V
  • Selectable attenuation of the output signal from 0 .. 60 s
  • Can be calibrated
  • Highly stable measurements thanks to cyclical self-calibration of the zero point
  • High level of overpressure protection even in the smallest measuring ranges

Measurement ranges:

  • 10 / 50 / 100 / 250 / 500 Pa
  • 1 / 2.5 / 5 / 10 / 20 / 50 / 100 kPa
  • freely scalable from 10 .. 100 % within a measurement range
  • (others available on request)

Margin of error:

  • ± 0,2 % or ± 0,5 % of the scaled range (40 .. 100 % of max. value, min. 0.3 Pa)

Output (linear / root-extracted):

  • 0 .. 10 V (RL ≥ 2 kΩ)
  • 0 .. 20 mA (RL≤ 500 Ω)
  • 4 .. 20 mA (RL≤ 500 Ω)
  • ± 5 V (RL ≥ 2 kΩ)
  • (output signals can be configured freely)

Power supply:

  • 24 VAC/DC, ± 10 %
  • 24 VAC, +6 % (with galvanic seperation)
  • 230/115 VAC, -15 %

Interface (optional):

  • USB, data cable supplied
  • External zero-point calibration

Display (optional): multi-coloured LCD and keyboard

Request
Callback


Additional Information:

  • Item Code: P26
Yes! I am Interested
View PDF

Digital Differential Pressure Gauge

Digital Differential Pressure Gauge
  • Digital Differential Pressure Gauge
  • Digital Differential Pressure Gauge
Ask For Price
Product Price :Get Latest Price

Product Details:

Measuring Rangeupto 0-250 KPa
BrandBECK
Model No.990
Accuracy1% of FS
Size143mm x 96mm x 48mm
Mounting Of GaugePanel mounting
Pressure ElementsPiezoresistive pressure transducer
Operating Temperature Range0 ... 50 C
Output Signal0...10V or 4...20mA
Usage/ApplicationMonitoring of air and non-aggressive gases
Display TypeRed 7 segment LED display, 4 digits
Weight230g
Model Number990

BECK Digital Differential Pressure Gauge 990

General Description:

The differential pressure gauges 990 Display are for air andnon-aggressive gases and will be used to measure differential pressure, overpressure and vacuum. They offer one adjustablepressure range and two output signals, which can be selectedin the menu. The type 990M has a manual zero offset calibration,the type 990A has an automatic zero offset calibration.

Applications: Monitoring of air and non-aggressive gases.

Adjustable pressure range:

To adapt the instrument to the application, the factory-set pres-sure range can be modified in the menu in a range from 100% to 20% of its full scale value.

Switchable pressure units:
The instrument offers three different pressure units to show in thedisplay, which can be selected in the menu. Factory setting isPascal, which can be changed to mbar or inWC.

Switchable output signal:
The output signal is either 0...10V or 4...20mA, which can beeasily changed in the menu.

Adjustable response time:
The response time of the output signal can be configured usingthe menu in a range from 0.1 to 20s.

Easy offset calibration:
The output signal of the type 990M can be re-calibrated to zeroin the menu when the instrument is in a pressure less state. The series 990A performs an automated zero offset compensation.Here any drift of the zero-point is automatically corrected in regular intervals. No re-calibration is needed which reducesmonitoring and maintenance efforts.

Volume flow measurement:
The shape of the output signal can be changed in the menufrom linear to square rooted to enable a volume flow measurement via a differential pressure reading.

Switching output:
To give a switch signal at an user defined pressure level theinstrument has two adjustable relay switching outputs witha maximum switching capacity of 250VAC/5A

Measuring method:Piezoresistive pressure transducer
Request
Callback


Additional Information:

  • Item Code: 990
Yes! I am Interested
View PDF

DIFFERENTIAL PRESSURE TRANSMITTER

DIFFERENTIAL PRESSURE TRANSMITTER
  • DIFFERENTIAL PRESSURE TRANSMITTER
  • DIFFERENTIAL PRESSURE TRANSMITTER
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/Applicationfan, blower and filter monitoring
Display TypeLCD display
Power Supply10-35 VDC
Media TypeDry air or non-aggressive gases
Range0...2500 Pa
Warranty5 Year
Net Weight150 g
Enclosure RatingIP54
BrandH K INSTRUMENTS
Applicationfan, blower and filter monitoring
Power10 ... 35 VDC
Protection TypeIP54

DIFFERENTIAL PRESSURE TRANSMITTERS DPT-2W Series

Multi-range differential pressure transmitters with 4–20 mA 2-wire configuration DPT-2W series

differential pressure transmitters are engineered for building automation in the HVAC/R industry. The most technologically advanced transmitters on the market, measuring static and differential pressure, with field selectable range.

DPT-2W series devices include:

• 8 field selectable measurement ranges, unidirectional or bidirectional, selectable via jumper (see Model Summary)
• Pressure measurement in Pa
• 4–20 mA 2-wire current loop configuration
• Display (DPT-2W series device options)

DPT-2W series devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring
• pressure and flow monitoring
• valve and damper control
• pressure monitoring in cleanrooms

Technical details
Accuracy (from FS):±1.5 %Long term stability, typical 1 year:≤ ± 8 Pa; model 2500Measuring unit:PaZero point calibration:by pushbuttonSupply voltage:10…35 VDCOutput signal:4…20 mAOperating temperature:-10…+50 °CResponse time:0.8 / 4 sProtection standard:IP54

Request
Callback


Additional Information:

  • Item Code: DPT-2W-2500-R8
Yes! I am Interested
View PDF

Differential Pressure Gauge

Differential Pressure Gauge
  • Differential Pressure Gauge
  • Differential Pressure Gauge
  • Differential Pressure Gauge
  • Differential Pressure Gauge
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandH K INSTRUMENTS
Usage/ApplicationFan, blower and filter monitoring, Pressure and flow monitoring, Pressure monitoring in cleanrooms
Model NumberDPG
Application/UsageFan, blower and filter monitoring, Pressure and flow monitoring, Pressure monitoring in cleanrooms
ConditionNew
Weight234 G

DIFFERENTIAL PRESSURE GAUGES AND MANOMETERS DPG Series

Differential pressure gauge for HVAC applications

The DPG series differential pressure gauges are engineered for HVAC/R applications. The DPG series devices measure air and non-corrosive gas pressures (differential and positive) and provide a clear analog display of the measured values. The DPG series devices include field adjustable zero point calibration and overpressure protection.

DPG series devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring
• pressure and flow monitoring
• pressure monitoring in cleanrooms

Accuracy: < ± 2 % F.S (20 °C), (DPG60 < ± 4 %; DPG100 < ± 3 %)

Overpressure: Burst pressure: 20 kPa

Media compatibility: Dry air or non-aggressive gases

Measuring units:
Pa Measurement ranges: 0–60 Pa
0–100 Pa
0–120 Pa
0–200 Pa
0–250 Pa
0–300 Pa
0–400 Pa
0–500 Pa
0–600 Pa
0–800 Pa
0–1 kPa
0–1,5 kPa
0–2 kPa
0–3 kPa
0–5 kPa

Operating temperature: -5...+60 °C

Storage temperature: -40...+85 °C

Case: ABS
Cover: PC
Membrane: Silicone
Machinery: Aluminum and steel spring Unit
Mounting diameter: 110 mm
Weight: 234 g
Conformance Meets the requirements for CE marking: RoHS
Directive: 2011/96/EU
Request
Callback


Additional Information:

  • Item Code: DPG
Yes! I am Interested
View PDF

Differential Pressure Switch

Differential Pressure Switch
  • Differential Pressure Switch
  • Differential Pressure Switch
  • Differential Pressure Switch
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandH K INSTRUMENTS
Model No.PS
Usage/Applicationfan, blower and filter monitoring, pressure and flow monitoring
Enclosure RatingIP54
Pressure Range20 ... 4500 Pascal
Media TypeGas, Dry air or non-aggressive gases

Adjustable differential pressure switches for airThe PS series mechanical differential pressure switches offer a cost-effective solution for filter, fan and duct pressure monitoring in building automation systems in the HVAC/R industry. PS series products offer field selectable switching point adjustment and measurement units in Pa.

PS series devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring
• pressure and flow monitoring
• valve and damper monitoring


Technical details
Accuracy of switching point (low limit typ.):±5 Pa (PS1500: ±20 Pa, PS4500: ±100 Pa)
Accuracy of switching point (high limit typ.):PS200: ±20 Pa, PS300 & PS500: ±30 Pa, PS600 & PS1500: ±50 Pa, PS4500: ±200 Pa
Service life:over 1 000 000 switching operations
Electrical rating (resistive load):3 A / 250 VAC (PS200: 0.1 A / 250 VAC)
Electrical rating (inductive load):2 A / 250 VAC (PS200: --)
Operating temperature:-20...+60 °C
Protection standard:IP54
Request
Callback


Additional Information:

  • Item Code: PS
  • Delivery Time: Ex-stock
Yes! I am Interested
View PDF

Differential Pressure Transmitter

Differential Pressure Transmitter
  • Differential Pressure Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandH K INSTRUMENTS
Measuring Ranges-250 ... 2500 Pascal
Power Supply24 VAC/VDC
Ip Rating54
ProtectionIP54
Application/UsageAHU fan, blower and filter monitoring
ApplicationsAHU fan, blower and filter monitoring

DIFFERENTIAL PRESSURE TRANSMITTERS DPT-Dual-MOD Series

Differential pressure transmitter with two pressure sensors for air and an Input terminal for two analog inputs for external signal conversion into Modbus.

DPT-Dual-MOD combines two differential pressure transmitters into one device. It offers a possibility to measure pressure from two different points. It has a Modbus interface and an Input terminal. When using the Input terminal, temperature transmitters can be replaced with temperature sensors. As a result you will save in costs of the devices and in the installation costs. The AHU model that includes an air flow transmitter has been designed especially for ventilation units.


DPT-Dual-MOD series devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring
• pressure and flow monitoring
• valve and damper control
• pressure monitoring in cleanrooms

DPT-Dual-MOD-AHU can also be used for:

• air flow monitoring across centrifugal fans and blowers
• in-duct air flow monitoring
• VAV applications
Request
Callback


Additional Information:

  • Item Code: DPT-Dual-MOD
Yes! I am Interested
View PDF

Differential Pressure Transmitter For Ahu

Differential Pressure Transmitter For Ahu
  • Differential Pressure Transmitter For Ahu
Ask For Price
Product Price :Get Latest Price

Product Details:

Accuracy1%
Applicationfan,blower and filter monitoring
BrandH K INSTRUMENTS
Enclosure RatingIP54
Power Supply24 VAC or VDC5
Product Weight150 g
Protection TypeIP54
Rated Supply Voltage24 VAC or VDC
Warranty5 Year

DIFFERENTIAL PRESSURE TRANSMITTERS- DPT-Dual-MOD Series

Differential pressure transmitter with two pressure sensors for air and an Input terminal for two analog inputs for external signal conversion into Modbus

DPT-Dual-MOD combines two differential pressure transmitters into one device. It offers a possibility to measure pressure from two different points. It has a Modbus interface and an Input terminal. When using the Input terminal, temperature transmitters can be replaced with temperature sensors. As a result you will save in costs of the devices and in the installation costs. The AHU model that includes an air flow transmitter has been designed especially for ventilation units.

DPT-Dual-MOD series devices are commonly used in HVAC/R systems for:
• fan, blower and filter monitoring
• pressure and flow monitoring
• valve and damper control
• pressure monitoring in cleanrooms

DPT-Dual-MOD-AHU can also be used for:
• air flow monitoring across centrifugal fans and blowers
• in-duct air flow monitoring
• VAV applications


Technical details
Communication:RS-485 Modbus (RTU)
Accuracy (from applied pressure):
(model 2500)
Pressure < 125 Pa = 1 % + ±2 Pa
Pressure > 125 Pa = 1 % + ±1 Pa
Accuracy (from applied pressure):
(model 7000)
Pressure < 125 Pa = 1.5 % + ±2 Pa
Pressure > 125 Pa = 1.5 % + ±1 Pa
Zero point calibration:via Modbus or by pushbutton
Measuring units:Pressure: Pa, kPa, mbar, inchWC, mmWC, psi
Flow: (AHU model) m3/s, m3/hr, cfm, l/s, m/s, ft/min
Supply voltage:24 VDC ±10 % / 24 VAC ±10 %
Power consumption:< 1.3 W
Operating temperature:-10…+50 °C
Response time:1...20 s selectable via menu
Protection standard:IP54
Request
Callback


Additional Information:

  • Item Code: DPT-Dual
Yes! I am Interested
View PDF

Differential pressure gauge with alarm switch

Differential pressure gauge with alarm switch
  • Differential pressure gauge with alarm switch
  • Differential pressure gauge with alarm switch
  • Differential pressure gauge with alarm switch
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandOther
Usage/ApplicationMonitoring of air filters, Dust Collector, AHU filters
Model NumberDPG/PS
MountingMonitoring of air filters, Dust Collector, AHU filters
Application/UsageMonitoring of air filters, Dust Collector, AHU filters
Model No.DPG/PS
Weight510 g
Protection ratingIP54
Minimum Order Quantity10 piece
Enclosure ProtectionIP54
Warranty Period5 YEAR

FILTER ALERTS - DPG/PS Series

Combination of a differential pressure gauge and a differential pressure switch

In many situations filter monitoring requires an alarm signal and a local display. Our filter alerts are the right solution for these situations. The DPG/PS filter alerts combine differential pressure switches with gauges into one practical product offering.

APPLICATIONS:

The filter alerts are a solution for systems requiring visual indication of pressure on site and a switching point signal. The filter alerts are ideal for general-purpose work in air-conditioning and ventilation, especially in monitoring of air filters for contamination.

Technical details
Accuracy of gauge (FS 20 °C):±2 %Switching difference:DPG200/PS200: 20 Pa
DPG300/PS300: 20 Pa
DPG500/PS500: 20 Pa
DPG600/PS600: 30 Pa
DPG1,5K/PS1500: 80PaAccuracy of switching point (Low limit typ.):DPG200/PS200: 20 Pa ±5 Pa
DPG300/PS300: 30 Pa ±5 Pa
DPG500/PS500: 30 Pa ±5 Pa
DPG600/PS600: 40 Pa ±5 Pa
DPG1,5K/PS1500: 100 Pa ±10 PaAccuracy of switching point (High limit typ.):DPG200/PS200: 200 Pa ±20 Pa
DPG300/PS300: 300 Pa ±30 Pa
DPG500/PS500: 500 Pa ±30 Pa
DPG600/PS600: 600 Pa ±30 Pa
DPG1,5K/PS1500: 1500 Pa ±50 PaElectrical rating, resistive load:3 A / 250 VAC (DPG200/PS200: 0.1 A / 250 VAC)Electrical rating, inductive load:2 A / 250 VAC (DPG200/PS200: -)Maximum pressure:50 kPaService life:> 1 000 000 switching operationsMeasuring units:PaEnvironment:Operating temperature: -5...+60 °C
Storage temperature: -40...+85 °CProtection standard:IP54

Request
Callback


Additional Information:

  • Item Code: DPG-PS
Yes! I am Interested
View PDF

Electronic differential pressure switch and transmitter

Electronic differential pressure switch and transmitter
  • Electronic differential pressure switch and transmitter
  • Electronic differential pressure switch and transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

Output Voltage0-10 V
Display Type3 1/2 digit LCD backlit display
Supply24 VDC, 3 wire
Net Weight150 g
Applicationfan, blower and filter monitoring, pressure monitoring in cleanrooms, boiler pressure monitoring
Protection TypeIP54
Model Number/NameDPI
Media TypeGas, Dry air or non-aggressive gases
Usage/Applicationfan, blower and filter monitoring, pressure monitoring in cleanrooms, boiler pressure monitoring
Warranty5 YEAR
Protection ratingIP54
BrandH K INSTRUMENTS
Applicationsfan, blower and filter monitoring, pressure monitoring in cleanrooms, boiler pressure monitoring
Warranty Required5 Year

Electronic differential pressure switch and transmitter

The DPI series electronic pressure measuring devices are engineered for building automation in the HVAC/R industry. The most technologically advanced and versatile electronic differential pressure switches on the market, combining up to two relay outputs and 0–10 V output options.

The DPI includes the following field selectable features:

• Configurable switching point: Open on rise or fall in pressure
• Hysteresis of setpoint
• Measurement units (Pa, kPa, mmWC, inWC, mbar)
• Measurement range (4 ranges per model)
• Output signal (0−10 V, NO/NC)
• Span and zero point calibration

DPI options include:

• Up to 2 relays, which can be configured separately
• Autozero calibration

DPI series devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring
• staircase pressure monitoring and alarm
• pressure monitoring in cleanrooms
• boiler pressure monitoring and alarm

Technical details
Accuracy (from FS):±1.5 % (±0.7 % with span point calibration) (including: general accuracy, temperature drift, linearity, hysteresis, and repetition error)
Long term stability, typical 1 year:±1 Pa (±8 Pa without autozero element -AZ)
Zero point calibration:automatic with autozero element (-AZ) or by pushbutton
Supply voltage:21–35 VDC / 24 VAC ±10 % (without -AZ option)
24 VDC ±10 % / 24 VAC ±10 % (with -AZ option)
Current consumption:35 mA + relays (7 mA each) + AZ (20 mA) + 0…10 V output (10 mA)
Output signals:0…10 V, L min 1 kΩ
Relay output 1 (250 VAC / 30 VDC / 6 A)
Optional relay output 2 (250 VAC / 30 VDC / 6 A)
Operating temperature:-10...+50 °C
Response time:0,5...10 s
Protection standard:IP54
Request
Callback


Additional Information:

  • Item Code: DPI
Yes! I am Interested
View PDF

Air velocity Transmitter (Volume flow transmitter)

Air velocity Transmitter (Volume flow transmitter)
  • Air velocity Transmitter (Volume flow transmitter)
Ask For Price
Product Price :Get Latest Price

Product Details:

Ip RatingIP54
Power9 VDC battery connector
DisplayLocal
BrandH K INSTRUMENTS
Usage/ApplicationMeasure in-duct volume flow, velocity or differential pressure
Weight150 g
Power Supply9 VDC battery connector
Display Type2-line display (12 characters/line)
Protection ClassIP54

AIR FLOW AND VELOCITY TRANSMITTERS- DPT-FLOW-BATT

Multifunctional air flow meter for building automation systems where electricity is not available

The DPT-Flow-Batt series air flow transmitters are engineered for building automation in the HVAC/R industry. The most technologically advanced transmitters on the market, measuring volume flow, velocity, and static and differential pressure. The DPT-Flow-Batt series devices can be connected directly to the pressure measurement points in a centrifugal fan, providing accurate flow measurement of the fan. The smart user interface enables easy selection of settings according to the selected fan or in-duct measurement probe.

DPT-Flow-Batt series devices include:
• Two field selectable functions:
o Measure in-duct volume flow, velocity or differential pressure
o Measure airflow across centrifugal fans

• Multiple field selectable measurement units:
o Volume flow: m3/s, m3/h, cfm, l/s
o Velocity: m/s, ft/min o Pressure: Pa, inWC, mmWC, kPa, mbar

DPT-Flow-Batt series devices are commonly used in HVAC/R systems for:
• air flow monitoring across centrifugal fans and blowers
• in-duct air flow monitoring

Technical details
Accuracy (from FS):±1.5 % (Including: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error)
Zero point calibration:by pushbutton
Measuring units:Pressure: Pa, kPa, mbar, inchWC, mmWC, psi
Flow: m3/s, m3/hr, cfm, l/s, m/s, ft/min
Supply voltage:9 V battery
Current consumption:~20 mA on active mode
Operating temperature:-10…+50 °C
Response time:1.0−10 s, selectable via menu
Protection standard:IP54

Request
Callback


Additional Information:

  • Item Code: DPT-FLOW-BATT
Yes! I am Interested
View PDF

Low Pressure Calibrator

Low Pressure Calibrator
  • Low Pressure Calibrator
  • Low Pressure Calibrator
Get Best Quote
Approx. Price: Rs 4.5 Lakh / PieceGet Latest Price

Product Details:

BrandHalstrup-Walcher
ModelKAL200

Pressure calibration device with integrated pressure generator for stationary and mobile applications.

The KAL 200 calibration device combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly and easily. The desired pressure is indicated on the digital display and pressure is generated quickly and precisely through the use of a closed loop, thereby eliminating the need for an external pressure generator.

Special features:

High level of accuracy and long-term stability through automatic zero-point calibration Simple menu navigation for unit conversion, setting calibration points and setting the measurement range Menu navigation in German, English, Italian, French and Spanish Generation of positive and negative differential pressures Can be calibrated Easy to operate and produce calibration curves via USB port and PC

Technical Data:
Measurement ranges:

0 .. 100 Pa, 0 .. 200 Pa, 0 .. 500 Pa0 .. 1 kPa, 0 .. 2 kPa, 0 .. 5 kPa, 0 .. 10 kPa, 0 .. 20 kPa, 0 .. 50 kPa, 0 .. 100 kPa± 100 Pa, ± 200 Pa, ± 500 Pa± 1 kPa± 2 kPa, ± 5 kPa, ± 10 kPa, ± 20 kPa, ± 50 kPa, ± 100 kPa

Margin of error:

0.1 % of max. value ±1 digit, Measurement ranges > 0 .. 200 Pa / ± 200 Paor 0.2 % of max. value ±1 digit, Measurement ranges 0 .. 200 Pa / ± 200 Paor 0.3 % of max. value ±1 digit, Measurement ranges 0 .. 100 Pa / ± 100 Pa

Data interface:

USB port (standard)

Input / power supply (test objects):

0 .. 10 V or 0/4 .. 20 mA
Accuracy: 0.2 % of max. value
24 VDC / 100 mAThe KAL range provides the optimum solution for the following typical applications:
mobile or stationary calibration of pressure values in cleanrooms (pharma, semiconductors etc.) mobile or stationary calibration of blood pressure monitoring equipment in hospitals etc. mobile or stationary calibration of differential pressures in air-conditioning systems

Request
Callback


Additional Information:

  • Item Code: KAL-200
Yes! I am Interested
View PDF

Pressure Gauge

Pressure Gauge
  • Pressure Gauge
Get Best Quote
Approx. Price: Rs 640 / PieceGet Latest Price

Product Details:

Minimum Order Quantity10 Piece
BrandAFRISO

Applications
  • Intended for adverse service conditions where pulsating or vibration exists
  • Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts
  • Hydraulics
  • Compressors, shipbuilding
Special Features
  • Vibration and shock resistant
  • Especially sturdy design
  • NS 63, 100 approved by German Lloyd and Gosstandart approval
  • Scale ranges up to 0 ... 1,000 bar
  • Made in Germany
Request
Callback
Yes! I am Interested

Low Pressure Calibrator

Low Pressure Calibrator
  • Low Pressure Calibrator
  • Low Pressure Calibrator
  • Low Pressure Calibrator
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandHalstrup-Walcher
ModelKAL 84
Accuracy0.2%
Power Source230 VAC adaptor
ApplicationLaboratory
Weight Kg3 kg
Display TypeDigital

Pressure calibration device with integrated pressure generator for mobile applications.

Special features

  • High level of accuracy and long-term stability
  • Little zero point drift or hysteresis; largely independent of temperature
  • Analog output
  • Toggle on/off time constants for attenuating the display during pressure fluctuations
  • Can be calibrated

The portable, battery-operated KAL 84 calibration system combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly and easily. A high degree of accuracy and excellent reproducibility of results combined with a robust design give the system all the functionalities required for laboratory and service applications.

Calibration in mmHg (optional) makes the system ideal for applications in accordance with the regulations for users of medical products, e.g. blood pressure monitors and infusion/suction pumps

Measurement ranges
0 .. 100 Pa (0 .. 1 mbar)
0 .. 1 kPa (0 .. 10 mbar)
0 .. 10 kPa (0 .. 100 mbar)
0 .. 100 kPa (0 .. 1000 mbar)
0 .. 300 mmHg (0 .. 400 mbar)
0 .. 750 mmHg (0 .. 1000 mbar)

Margin of error

+- 0.2 % of max. value +- 1 digit, for measurement ranges 1 .. 50 kPa (optional) or
+- 0.5 % of max. value +- 1 digit
(0.3 Pa margin of error for the reference)

Power supply
230 VAC adaptor
115 VAC adaptor

 

Analog output
0 .. 1 V (RL 2 k) 2 connectors 4 mm

The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).
We also deliver a carrying bag or hand pump for the KAL 84.

Request
Callback


Additional Information:

  • Item Code: KAL84
Yes! I am Interested
View PDF

Differential pressure transmitter

Differential pressure transmitter
  • Differential pressure transmitter
  • Differential pressure transmitter
  • Differential pressure transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandHalstrup-Walcher
Transducer TypePressure Transducer
Model Number/NamePU/PI

Differential Pressure Transmitter - DELTA_P model


These differential pressure transmitters are available in a wide range of precision classes and therefore suitable for applications in the heating, air-conditioning and ventilation industries as well as sophisticated laboratory applications. An optional display allows measurement values to be read directly on-site in Pa, kPa or mmH2O. An optional time constant (up to 5s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Features
  • High level of accuracy
  • Little zero point drift or hysteresis; largely independent of temperature
  • LCD display (optional)
  • Output signal 0 .. 10 V (PU), 0/4 .. 20 mA (PI)
  • Factory-adjusted attenuation of the output signal of up to 5 s possible (optional)
  • Can be calibrated
Technical Data
Measurement ranges
50 / 100 / 250 / 500 Pa1 / 2.5 / 5 / 10 / 20 / 50 / 100 kPa

Output
PU 0 .. 10 V (RL 2 k )PI 0/4 .. 20 mA (RL 500 )

Supply voltage
230 VAC, +6%/-15% (50/60 Hz)2)

Display (optional)
3 1/2 digit 4 1/2 digit
Request
Callback


Additional Information:

  • Item Code: PU
Yes! I am Interested
View PDF

ATEX Differential Pressure Switch 930.EX

ATEX Differential Pressure Switch 930.EX
  • ATEX Differential Pressure Switch 930.EX
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBECK

ATEX APPROVED DIFFERENTIAL PRESSURE SWITCH

Adjustable differential pressure switch for monitoringoverpressure, vacuum and differential pressure of air or other non-aggressive, combustible gases.

Possible fields of application include:· Monitoring air filters and ventilators· Monitoring industrial cooling-air circuits· Overheating protection for fan heaters· Monitoring flows in ventilation ducts· Controlling air and fire-protection flaps· Frost protection for heat exchangersEx zones 1, 2 and 21, 22 with ATEX type examination
The switching pressure can be adjusted without a manometer at the adjustment knob with the guide value scale. Various versions are available for this with overlapping adjustment ranges of between 0.2 mbar and 50 mbar. The pressure switch is equipped as standard with a transparent cover, protection class IP54.


Ex i-circuits:
This pressure switch can be used in potentially explosive zones1, 2 and 21, 22. In the safe area, an associated isolating means(separating barrier, switching amplifier) must be connected before.The entire isolating circuit must then be proved to keep inherentsafety. For this purpose, the power specifications (P, I, U) of thebarrier must be lower and the characteristics (L, C) higher thanthose of the pressure switch and of the connection line (blue colour).
Request
Callback


Additional Information:

  • Item Code: 930.EX
Yes! I am Interested
View PDF

Basic Pressure Transmitter

Basic Pressure Transmitter
  • Basic Pressure Transmitter
Ask For Price
Product Price :Get Latest Price
We are a reliable choice by the customer in sourcing Jumo Midas C08 – OEM Basic Pressure Transmitter that offers universal application is reflected by the wide choice of measuring ranges, process connections, and electrical connection. Furthermore, the high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility. This finds its applications in compressors, machine and plant engineering, industrial pneumatics, commercial vehicles and building technology.

Features:
  • Quicker and safer installation
  • Long term stability
  • Elastomer sealed
Other Details:
  • 0 to 1.6 bar up to 0 to 60 bar relative
  • Elastomer-sealed
  • Compact design: as of 65 mm in length
  • Long-term stability: < 0.2 %
  • New level of quality for the OEM sector
  • 60 % quicker device installation with the QUICKON quick-clamp technology
  • Temperature compensation range increased by 50 % to -20 to +100 °C
  • 2.5 times more vibration resistance than the industry standard
  • Made in Germany
Process reliability:
  • The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility. The ceramic measuring cell made of aluminum oxide has an excellent long-term stability and a high overload resistance. These features are the result of the used sensor material and a special calibration process.
Economical:
  • The QUICKON quick-clamp technology enables quicker and safer installation. The connection is even guaranteed with any temperature fluctuations that may occur thanks to the spring contacts. This electrical connection means that installation times can be shortened and as a result, costs are reduced by 60 % compared to conventional connection options.
Versatile:
  • The universal application is reflected by the wide choice of measuring ranges, process connections, and electrical connections.
Applications:
  • Compressors
  • Machine and plant engineering
  • Industrial pneumatics
  • Commercial vehicles
  • Building technology
Request
Callback


Additional Information:

  • Item Code: 401002
Yes! I am Interested
View PDF

Differential Pressure Transmitter

Differential Pressure Transmitter
  • Differential Pressure Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandJumo

The pressure transmitter with silicon sensor is used to detect the differential pressure (0 to 0.4 bar – 0 to 16 bar) in liquid, gaseous, and low-aggressive media.
The differential pressure measuring cell records two pressures. The differential value from these two pressures is converted into an analog two-wire current signal or ratiometric output signal. The piezoresistive silicon sensor is integrated into a stainless steel measuring cell. A plastic case accommodates the stainless steel measuring cell and the electronics.
Features:

Measuring ranges: 0 to 400 mbar – 0 to 16 bar differential pressure, silicon sensor with stainless steel separating diaphragmMedium: gaseous, liquid, or low-aggressionVersion with elastomer seal, optional weldingCompact design: as of 78 mm in lengthParts in contact with media: PBT plastic, option with full stainless steelOverload pressure up to 30 bar on one sideCustomer benefits:
Economical:
Type 401050 is the differential pressure model in the JUMO MIDAS pressure transmitter range with sensor technology that has been proven thousands of times over. An almost fully automated production sequence (digital compensation and calibration of the sensor module) and a functional design reduce both the production time and manufacturing costs.
Process reliability:
The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility.
Versatile:
High-quality materials allow for a wide application field. Various output signals, different process connections, and case materials are available.
Applications:

Filter monitoring
A typical application is filter monitoring in gases or liquids, which uses the different pressure ratios before and after the filter to ascertain its pollution.Filling level
In pressurized boilers, a differential pressure measurement can be used to determine the exact filling level, irrespective of system pressure fluctuations.Pump control
The rotational speed of a pump can be adapted to the requirements of capacity and energy consumption via a control system by measuring the pressure ratio before and after the pump.

Request
Callback


Additional Information:

  • Item Code: 401050
Yes! I am Interested
View PDF

High Temperature Pressure Transmitter

High Temperature Pressure Transmitter
  • High Temperature Pressure Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandJumo

The JUMO dTRANS p31 pressure transmitter is used to measure liquid and gaseous media in hygienic applications. The nominal ranges span from -1 to 0 bar, to a maximum of 0 to 60 bar as 2-wire or 3-wire versions. The large number of process connections allows users to choose between a welded system without seals and a screw-connected system with seals, while still offering modularity in terms of the process connection adapters (JUMO PEKA type 409711). Based on a system of an easy-to-clean front flush design, this transmitter specifically meets the requirements for hygienic process reliability. One significant benefit is the high-temperature measuring cell, which permits a permanently high or strongly fluctuating temperature in the medium of between -30 and +200 °C. Special degrees of roughness for the process connections are available upon request.

Features:
  • For medium temperatures > 120 °C or frequent changes in temperature
  • Temperature of medium at the diaphragm: -30 to +200 °C
  • Measuring ranges: 0 to 1 bar -- 0 to 60 bar relative pressure, 0 to 1 bar -- 0 to 25 bar absolute pressure
  • Fully welded stainless steel measuring system, without seals
  • Optional raised linearity: ≤ 0.2 % of end value
  • Optional electrolytic polishing of process connection
  • Hygienic design
  • Protection type: IP65/IP67
Customer benefits:
  • Process reliability
    A hygienic design, parts that are in contact with the media being made of stainless steel, and a front flush system prevent microbial contamination and therefore guarantee maximum process reliability. The transmitter is based around a piezoresistive measuring cell, which is safe and reliable with high overload resistance and long-term stability.
  • Versatile
    A broad spectrum of measuring ranges and electrical outputs as well as a large number of process connections guarantee variant diversity that can be specifically adapted to any application. Versions are available in a cast option and/or with reduced deviation from characteristic line.

Applications:
  • Sterilizers, autoclaves
  • Food and beverage industry
  • Medical technology
  • Chemical industry
  • Biotechnology
  • High-purity water installations
Request
Callback


Additional Information:

  • Item Code: 402050
Yes! I am Interested
View PDF

Magnehelic Differential Pressure Gauge

Magnehelic Differential Pressure Gauge
  • Magnehelic Differential Pressure Gauge
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandDwyer

SERIES 2000 Magnehelic® Gage for high accuracy-guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. Product Applications: • Filter Monitoring • Air Velocity with Dwyer Pitot Tube • Blower Vacuum Monitoring • Fan Pressure Indication • Duct, Room or Building Pressures • Clean Room Positive Pressure Indicatio
Request
Callback


Additional Information:

  • Item Code: 2000
Yes! I am Interested
View PDF

Pressure Switches

Pressure Switches
  • Pressure Switches
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandBeck

In order to cater variegated requirements of our esteemed clients, we are engaged in trading and supplying a excellent quality array of Beck 901 Prescal Pressure Switches With Scale.

Uses:

Used in vending machines, small tanks, pumping stations, water tanks.Features:

Accurate dimension Easy to install Shock-proofApplication:

Adjustable pressure switch monitoring overpressure, vacuum ordifferential pressure of liquid and gaseous also aggressive media.The pressure switch uses a scaled adjustment knob to enablethe adjustment of trip and reset pressure without the use of ascrewdriver.Temperature rangeAmbient temperature from 20 C to 85 C.Temperature of media from 85 C or 130 C depending onmaterial of pressure connection and diaphragm.Diaphragm materialDepending on media NBR, Silicone, FKM (Viton), EPDM.For 901.8x Silicone, others upon request.Electrical ratingValues indicated for resistive loadAgNi-contacts: 6(1.5) A/250 VAC2 A/24 VDCGold-plated contacts: 100 mA/24 VAC30 mA/24 VDCAgNi-contacts up to 10 A/250 VAC can be supplied uponrequest.Electrical connectionAMP connection 6.3 mm x 0.8 mm DIN 46244.

Request
Callback


Additional Information:

  • Item Code: 901
Yes! I am Interested
View PDF

Universal Pressure Transmitter

Universal Pressure Transmitter
  • Universal Pressure Transmitter
Ask For Price
Product Price :Get Latest Price
Features:
  • Successor model to MIDAS SI (type 401006)
  • Measuring ranges: 0 to 1 bar – 0 to 100 bar relative pressure, 0 to 1 bar – 0 to 40 bar absolute pressure
  • Silicon sensor with stainless steel separating diaphragm
  • Welded measuring system
  • Compact design: as of 56 mm in length
Customer benefits:
  • Economical
    Type 401010 is the successor model to JUMO MIDAS SI (type 401006), with sensor technology that has been proven thousands of times over. An almost fully automated production sequence (digital compensation and calibration of the sensor module) reduces the production time and manufacturing costs.
  • Process reliability
    The piezoresistive silicon sensor has a high level of overload protection and long-term stability. The full final inspection in the fully-automated measuring and calibration facility ensures that each pressure transmitter is of high quality.
  • Time-saving, simple, and versatile
    The installation of the measuring device requires little work and the electrical installation is simple. The modular structure offers universal use in almost every application.
Applications:
  • HVAC (heating, ventilating, and air conditioning)
  • Refrigeration technology
  • Compressor engineering
  • Packaging industry
  • Machine and plant engineering
The JUMO MIDAS S05 pressure transmitter is available with relative pressure and absolute pressure measuring ranges.
The fully welded measuring system (without seals) made of high-grade stainless steel allows this device to be used in almost all media, even in harsh conditions. The structure ensures optimum protection against process medium leakage.
The used silicon sensor is resistant to extreme overloading and is capable of handling millions of pressure cycles
    Request
    Callback


    Additional Information:

    • Item Code: 401010
    Yes! I am Interested
    View PDF

    Hygienic Pressure Transmitter

    Hygienic Pressure Transmitter
    • Hygienic Pressure Transmitter
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    ConditionNew
    BrandLabom

    Features
    • Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids in applications for food and pharmaceutical industry
    • Stainless steel case in hygienic design, degree of protection IP 65/67
    • Accuracy 0.1 %
    • High-resolution graphic display with Intuitive 4-button operation and backlight
    • Comprehensive parameterising functions
    • Comprehensive simulation and diagnostic functions
    • Quick access to device data
    • Development according to SIL2
    • Nominal range 0.25 bar to 40 bar
    • Turndown up to100:1
    • Measuring rate up to 100 Hz
    • Output signal 4…20 mA with HART® protocol
    • Configuration memory
    • Digital communication via PDM, FDT/DTM, 375/475 Field Communicator
    • Output functions: linear, invers, square root, table function with up to 64 support points
    • Media temperature up to 160 °C
    • Wetted parts stainless steel
    • Case design process connection bottom
    • Case design process connection back
    • Various hygienic process connections
    • Approved according to NAMUR 95
    • EAC declaration (upon request)
    • Options
      • Explosion protection for gases and dust
      • Classification per SIL2
      • Certificate of measuring equipment for Russian Federation
      • Material certificate per EN 10204
      • Calibration certificate per EN 10204
      • Active temperature compensation (ATC technology)
      • Removable display and control unit
      • Degree of protection IP 69K
      • Front cover of stainless steel with window of non splin-tering glass
      • Wetted parts electropolished
    Request
    Callback
    Yes! I am Interested
    View PDF

    Diaphragm Seal Differential Pressure Transmitter

    Diaphragm Seal Differential Pressure Transmitter
    • Diaphragm Seal Differential Pressure Transmitter
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandLabom

    Features
    • Differential pressure transmitter for diaphragm seal operation
    • Stainless steel case in sturdy design, degree of protection IP 65/67
    • Accuracy 0.1 %
    • High-resolution display with intuitive 4-button operation and backlight
    • Comprehensive parameterising functions
    • Comprehensive simulation and diagnostic functions
    • Quick access to device data
    • Development according to SIL2
    • Nominal ranges 0.25 to 16 bar
    • Turndown up to 100:1
    • Measuring rate up to 100 Hz
    • Output signal 4…20 mA with HART® protocol
    • Configuration memory
    • Digital communication via PDM, FDT/DTM, 375/475 Field Communicator
    • Output functions: linear, invers, square root, table function with up to 64 support points
    • Media temperature -90…400 °C
    • Wetted parts stainless steel
    • Various process connections with diaphragm seal technology
    • Approved according to NAMUR 95
    • EAC declaration (upon request)

    Options
    • Explosion protection for gases and dust
    • Classification per SIL2
    • Certificate of measuring equipment for Russian Federation
    • Material certificate per EN 10204
    • Calibration certificate per EN 10204
    • Removable display and control unit
    • Degree of protection IP 69K
    • Front cover of stainless steel with window of non splintering glass
    Request
    Callback
    Yes! I am Interested
    View PDF

    Absolute pressure transmitter

    Absolute pressure transmitter
    • Absolute pressure transmitter
    • Absolute pressure transmitter
    • Absolute pressure transmitter
    • Absolute pressure transmitter
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Brandhalstrup walcher
    Transducer TypePressure Transducer

    Absolute pressure transmitter for measurement of atmospheric pressure

    Special features

    • High level of accuracy and long-term stability
    • Little zero point drift or hysteresis; largely independent of temperature
    • Can be adjusted (reduction) to the altitude of the place of installation
    • Available for a variety of measuring ranges, output signals and supply voltages
    • Available with display (optional)
    • Can be calibrated

    The BA 1000 absolute pressure transmitter is designed to display barometric pressure. At the heart of the unit is an evacuated measurement cell made from an elastic copper material.The deflection of the measurement cell due to atmospheric pressure is measured inductively without making contact. The transducer emits an electrical output signal proportional to the pressure. The device can be powered using a 24 VDC power supply or a variety of AC voltages. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).
    Measuring ranges
    80 .. 120 kPa
    85 .. 115 kPa
    90 .. 110 kPa
    95 .. 115 kPa

    Power supply
    24 VDC, +20 % / -15 %
    24 VAC, +6 % / -15 % (50/60 Hz)
    115 VAC, +6 % / -15 % (50/60 Hz)
    230 VAC, +6 % / -15 % (50/60 Hz)


    Margin of error
    +- 1 % of measurement range
    Reference +- 0.5 hPa with respect to sea level

    Output

    0 .. 10 V (RL 2 k)
    0 .. 20 mA (RL 500 )
    4 .. 20 mA (RL 500 k)

    Display (optional)
    3 1/2 digit

    Reduction
    0 .. 850 m above sea level
    (please indicate when placing your order)

    The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).
    The instrument is alsoavailable with LCD (optional).

    Request
    Callback


    Additional Information:

    • Item Code: BA1000
    Yes! I am Interested
    View PDF

    Differential Pressure Transmitter (Air Flow Transmitter)

    Differential Pressure Transmitter (Air Flow Transmitter)
    • Differential Pressure Transmitter (Air Flow Transmitter)
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandH K INSTRUMENTS
    ModelDPT-CTRL

    AIR HANDLING CONTROLLER, DPT-CTRL

    Multifunctional PID controller with differential pressure or air flow transmitter for building automation systems 

    The DPT-Ctrl series PID controllers are engineered for building automation in the HVAC/R industry. With the built-in controller of the DPT-Ctrl it is possible to control the constant pressure or flow of fans, VAV systems or dampers. When controlling air flow, it is possible to select a fan manufacturer or a common measuring probe that has a K-value.

    DPT-Ctrl series devices include:
    • PID-controller
    o Control differential pressure or air flow in duct or across centrifugal fans
    o All parameters (PID) are adjustable via menu

    • Differential pressure or air flow transmitter (selectable via menu)
    o Measure and monitor differential pressure or air flow in duct or across centrifugal fans

    • Multiple field selectable measurement units:
    o Volume flow: m3/s, m3/h, cfm, l/s
    o Velocity: m/s, ft/min
    o Pressure: Pa, inWC, mmWC, kPa, mbar, psi

    • Unique proportional output options:
    o Control output: Voltage (0–10 V) or current (4–20 mA)
    o Differential pressure or air flow: Voltage (0–10 V) or current (4–20 mA)

    DPT-Ctrl series devices are commonly used in HVAC/R systems for:
    • Controlling differential pressure or air flow in air handling systems
    • VAV applications
    • Controlling parking garage exhaust fans 


    Accuracy (from applied pressure): 
    (model 2500)
    Pressure < 125 Pa = 1 % + ±2 Pa
    Pressure > 125 Pa = 1 % + ±1 Pa
    Accuracy (from applied pressure): 
    (model 7000)
    Pressure < 125 Pa = 1.5 % + ±2 Pa
    Pressure > 125 Pa = 1.5 % + ±1 Pa
    Measuring units:Pressure: Pa, kPa, mbar, inchWC, mmWC, psi
    Flow: m3/s, m3/hr, cfm, l/s, m/s, ft/min
    Control signal:0…10 V or 4…20 mA (selectable by jumper)
    Output signal for pressure or air flow (selectable via menu):0…10 VDC, Load R minimum 1 kΩ or 4…20 mA, maximum load 500 Ω (selectable by jumper)
    PID-parameters:Adjustable via menu
    Zero point calibration:Automatic with autozero element (-AZ) or by pushbutton
    Supply voltage:24 VDC ±10 % / 24 VAC ±10 %
    Power consumption:< 1.0 W
    Operating temperature:-10…+50 °C (with autozero calibration -5...+50 °C)
    Protection standard:IP54
    Request
    Callback


    Additional Information:

    • Item Code: DPT-CTRL
    Yes! I am Interested
    View PDF

    Differential pressure transmitter for liquid

    Differential pressure transmitter for liquid
    • Differential pressure transmitter for liquid
    • Differential pressure transmitter for liquid
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandH K INSTRUMENTS
    ApplicationMeasuring pressure in neutral fluids and non-aggressive gases
    Rated Supply Voltage15 ... 24 VDC

    DIFFERENTIAL PRESSURE TRANSMITTERS FOR LIQUIDS - DPTL Series 

    The DPTL is made for differential pressure detection in liquids for air-conditioning, heating and water systems. The equipment can withstand mildly corrosive substances and liquids.

    Applications:

    PTL and DPTL series pressure transmitters are suitable for measuring pressure in neutral fluids and non-aggressive gases. Also compatible with refrigerants. They are suitable for all kind of tasks in air-conditioning, heating and water systems.


    Technical details
    Accuracy (from FS):±1 %
    Power:15...24 VDC/VAC
    Output:0...10 V or 4–20 mA
    Protection standard:IP65
    Pressure connector:inside thread G1/4”
    Operating temperature:-40...105 °C
    Request
    Callback


    Additional Information:

    • Item Code: DPTL
    Yes! I am Interested
    View PDF

    Inclined Manometer with alarm switch

    Inclined Manometer with alarm switch
    • Inclined Manometer with alarm switch
    • Inclined Manometer with alarm switch
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandH K INSTRUMENTS
    ModelMM-PS
    Measuring Range0 ... 600 Pascal

    FILTER ALERTS- MM/PS Series

    Combination of a liquid column manometer and a differential pressure switch

    In many situations filter monitoring requires an alarm signal and a local display. Our filter alerts are the right solution for these situations. The filter alerts combine differential pressure switches with manometers into one practical product offering.

    Technical details
    Switching difference:30 Pa
    Accuracy of switching point (low limit typ.):40 Pa ±5 Pa
    Accuracy of switching point (high limit typ.):600 Pa ±30 Pa
    Electrical rating, resistive load:3 A / 250 VAC
    Electrical rating, inductive load:2 A / 250 VAC
    Maximum pressure:50 kPa
    Service life:> 1 000 000 switching operations
    Measuring units:Pa
    Environment:Operating temperature: -20...+60 °C
    Storage temperature: -40...+85 °C
    Protection standard:IP54
    Request
    Callback


    Additional Information:

    • Item Code: MM-PS
    Yes! I am Interested
    View PDF

    Static Pressure Tip

    Static Pressure Tip
    • Static Pressure Tip
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity50 Piece
    ApplicationIndustrial
    BrandBECK GmbH
    MaterialABS

    These sensors are for use with Manometers, Magnehelic® Gages, Differential Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc.
    Request
    Callback


    Additional Information:

    • Delivery Time: Ex-stock
    Yes! I am Interested

    Barometer

    Barometer
    • Barometer
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandHalstrup-Walcher
    ApplicationMeasurement of barometric pressure, factory-adjusted to sea level values
    Product Weight600 g
    Protection TypeIP54
    Model Number/NameBA 1000

    Absolute pressure transmitter for measuring absolute pressures in closed systems

    Special features

    • High level of accuracy and long-term stability
    • Little zero point drift or hysteresis; largely independent of temperature
    • Reduction can be performed to adjust to the altitude of the place of installation
    • Available for a variety of measuring ranges, output signals and supply voltages
    • Available with display (optional)
    • Can be calibrated

    The AD 1000 absolute pressure transducer is designed for displaying atmospheric pressure (BA 1000) and absolute pressure. At the heart of the unit is an evacuated measurement cell made from an elastic copper material. The deflection of the measurement cell due to absolute pressure is measured inductively without making contact. The transmitter emits an electrical output signal proportional to the absolute pressure. The device can be powered using a 24 VDC power supply or a variety of AC voltages. The pressure port is led through in the AD 1000 making it suitable for measuring absolute pressures in closed systems.
    Measuring ranges
    0 .. 50 kPa
    0 .. 100 kPa
    80 .. 120 kPa
    90 .. 110 kPa
    100 .. 0 kPa

    Power supply
    24 VDC, +20 % / -15 %
    24 VAC, +6 % / -15 %
    115 VAC, +6 % / -15 %
    230 VAC, +6 % / -15 %

    Margin of error
    +- 1 % of measurement range
    Reference +- 0.5 hPa with respect to sea level

    Output signals

    0 .. 10 V (RL ≥ 2 kΩ)
    0 .. 20 mA (RL ≤ 500 Ω)
    4 .. 20 mA (RL ≤ 500 kΩ)

    LCD (optional)
    3 1/2 digit

    Reduction
    0 .. 850 m above sea level
    (please indicate when placing your order)


    Request
    Callback


    Additional Information:

    • Item Code: AD1000
    Yes! I am Interested
    View PDF

    OEM Pressure Transmitter

    OEM Pressure Transmitter
    • OEM Pressure Transmitter
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandJumo

    The JUMO MIDAS S06 pressure transmitter is available with measuring ranges starting from 0 to 100 mbar.The device features a silicon sensor that is resistant to extreme overloading, even in the lowest measuring ranges, and it is capable of handling millions of pressure cycles.The fully welded measuring system (without seals) made of high-quality stainless steel allows this device to be used in almost all media, even in harsh conditions. The structure ensures optimum protection against process medium leakage.

    Features:

    Measuring ranges as of 0 to 100 mbar relativeHigh degree of process reliability due to awelded measuring system with no sealsRobust and maintenance-free measurementtechnology thanks to extreme overload resistanceParts in contact with media are made of stainless steelCompact design: as of 58 mm in lengthCustomer benefits
    Economical:
    A high degree of automation (digital compensation and calibration of sensor module) reduces production time and manufacturing costs.

    Process reliability:
    The piezoresistive silicon sensor has long-term stability and a high level of overload protection. The full final inspection in the fully automated measuring and calibration facility guarantees that each pressure transmitter is of a high quality.

    Time-saving, simple, and versatile:
    The installation of the measuring instrument requires little work and electrical installation is simple. The modular structure means that it can be used universally in almost any application.

    Applications:

    HVAC (heating, ventilating, and air conditioning)Filter technologyFilling level measurementBubble-through methodPackaging industryMachine and plant engineering

    Request
    Callback


    Additional Information:

    • Item Code: 401011
    Yes! I am Interested
    View PDF

    Pressure Transmitter

    Pressure Transmitter
    • Pressure Transmitter
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandJumo

    The pressure transmitter JUMO dTRANS p30 is used to measure liquid and gaseous measuring material (-30 to +120 °C).

    Features:
    Measuring range: 0 to 250 mbar – 0 to 600 bar relative pressure, 0 to 600 mbar – 0 to 25 bar absolute pressureMedium temperature: -30 to +120 °CFor liquid and gaseous mediaAll commercially available process connections, including hygienicFully welded stainless steel measuring system, without sealsOptional with increased linearity ≤ 0.2 % from end valueProtection type: IP65/IP67Customer benefits:
    Process reliability:
    The fully-welded measuring system does not require seals and guarantees maximum process safety as well as reliability.Its core is a piezoresistive measuring cell, featuring high overload resistance and longevity. It is safe, reliable, and temperature resistant.
    Versatile:
    A broad spectrum of measuring ranges and electrical outputs as well as a large number of process connections guarantee variant diversity that can be specifically adapted to any application. Versions are available in a cast option and/or with reduced deviation from the characteristic line (≤ 0.2 % from end value). Protection types up to IP67 can be implemented with connecting cable or round plug if requested.

    Applications

    IndustryFood and beverages industryPharmaceutical industryUniversalUniversal

    Request
    Callback


    Additional Information:

    • Item Code: 404366
    Yes! I am Interested
    View PDF

    Differential Pressure Switch

    Product Price :Get Latest Price

    Product Details:

    Model No.908
    Usage/Applicationover pressure, vacuum or differential pressure of liquid and gaseous, aggressive media
    Enclosure RatingIP54 / IP65 depending on the used protection cap
    Pressure Range40 ... 1000 mbar
    Media TypeGas, Liquid

    Differential pressure switch 908 for liquid with adjustable setting

    Application:
    Adjustable differential pressure switch monitoring overpressure, vacuum or differential pressure of liquid and gaseous – also aggressive – media.

    The differential pressure switch uses an adjusting screwto enable the adjustment of the switching pressure.

    Class of control and regulation function: A

    Temperature range:Ambient temperature from -10 to +80°CTemperature of media from -10 to +80°CStorage temperature from -40 to +80°C

    Accuracy of the switching pressure:Repeatability ±10 %

    Materials:

    Diaphragm: EPDM / NBR / Viton / SiliconeMedia contacting parts: Chrome / Stainless steel / Brass / Diaphragm material

    Pressure connection: Inner thread G 1/8 of Brass (CuZn40)P1+ / P2–

    Pressure ranges:

    908.32: 40 ... 200 mbar908.34: 150 ... 1000 mbar

    Switching hysteresis (typical):908.32: 30 mbar908.34: 100 mbar

    Maximum operating pressure: 10 bar

    Burst pressure: 20 bar

    Life: Mechanically more than 1 million cycles

    Weight: 850 g with mounting bracket and protection cap

    Electrical rating:Standard version max. 6 (1.5) A / 250 VAC max. 10 (2.0) A / 250 VACLow power version max. 100 mA / 24 VAC max. 30 mA / 24 VDC

    Protection:IP00 without protection capIP54 / IP65 depending on the used protection cap

    Conformity:EU Low Voltage DirectiveEU RoHS Directive

    Packaging unit: 1 or 10 pieces
    Request
    Callback


    Additional Information:

    • Item Code: 908
    Ask For Price
    Yes! I am Interested
    View PDF
    X

    Explore more products



    Reach Us
    Ramnarayan Ajmera (Sales & Marketing Manager)
    Shop No. 303-304, Block C, 3rd Floor, Pushp Business Campus S. P. Ring Road, Vastral Cross Road, Vastral
    Mahadev Nagar Tekra, Ahmedabad- 382418, Gujarat, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS