Parshvi Technology (India) Private Limited

NIR absorption sensor in compact design EXplore 131 is a NIR turbidity sensor for monitoring production processes in the food and beverage industries as well as in many areas of further process applications. The robust and compact design in stainless steel housing and the wear-free sapphire windows make the EXplore 131 a reliable absorption sensor with integrated amplifier. The measured values are output via the standard interface of 4…20 mA.

Brand : Exner

• Compact design with integrated amplifier
• Durable sapphire window
• Hygienic Design, CIP/SIP-capable
• LED light source guarantees a durable and stable signal
• No calibration and parametrisation necessary

Extremely reliable in contaminated and aggressive water: Zirkon® Rx Process sensors are used in dirty process and wastewater treatment applications due to their robust material characteristics. The pollution resistant PTFE diaphragm and the robust silver/silver chloride (Ag/AgCl) reference cartridge make this sensor suitable for demanding environments. The large surface or the measuring electrode (gold band or platinum band) ensures reliable measurement results.

Brand : Kuntze

INLINE BRIX MONITOR DCM-20 WITH HYGIENIC PROCESS CONNECTIONS

• Define liquid product interfaces in beverage and dairy products filling lines.
• Achieve and ensure product quality in sugar dissolving, juice blending and jam vessels.
• Correlate membrane filtration efficiency of protein and whey separation in Ultra Filtration systems.
• Optimize steam feed in dairy evaporation processes.

The Inline Brix monitor is installed directly in 1.5″ process lines with sanitary tri-clamps. Optional 2.5″ sanitary tri-clamp, DN25 APV tank bottom flange and Varinline® connections are presented in the standard product portfolio.

Brand : KXS

Robust redox measurement in demanding chemical environments: Zirkon® Rx Wide Body sensors are primarily used in flotation processes, leaching, neutralization and wastewater control. The durable PPS shaft protects this sensor against aggressive chemicals. The annular PTFE diaphragm is resistant to pollution. Zirkon® Rx Wide Body sensors are easy to install in pipelines due to a ¾” NPT thread. Versions with fix cable allow immersion measurements.

1. Brand : Kuntze

Applications
•       Industrial Water
• Drinking Water
• Process Water
• Food & Beverage
• Waste Water Treatment

Zirkon® Redox Universal is a high-quality allround sensor for use in many media. The sensor is particularly suitable for drinking and process water applications

Advantages
• Low maintenance due to gel filling
• Long service life
• High quality Zirkon junction for reliable measurement results

Brand : Kuntze

• EBC / FAU / mg/l / AU / OD or customer defined units
• Standardized 12 mm design with integrated amplifier
• No traditional transmitter necessary
• Wearless sapphire windows, CIP-capable
• Hygienic design, autoclavable
• Maintenance free due to LED light source
• Data output directly on PC, Modbus RS485 or 0…20 mA
• Easy parametrization with EXpert software
• Usable with retractable housings for automated sensor cleaning

Brand : Exner

EXpure 191 is a highly accurate compact NIR turbidity sensor for monitoring processes with very low turbidity, e.g. in water applications. It is well suited for swimming pool applications, as well as for some special measuring points in the drinking water sector. The measuring principle used is a 90° scattered light measurement.

Brand : Exner

Key Features
• Rapid sensor response
• Reduced maintenance due to ASR® automatic sensor cleaning
• Durable sensor design allows for manual cleaning as needed
• Stable and accurate measurement even in challenging water conditions
• No flexible membrane or electrolytic gel replacement
• No reagents or consumable
• No mechanical moving parts
• Low lifecycle cost
• EPA method 334.0 compliant

Brand : Kuntze

• Compact design with integrated amplifier and touch display
• %-turbidity / EBC, FAU / mg/l / AU / OD or cusomer defined unit
• Durable sapphire lens
• Hygienic Design, CIP-capable
• LED light source guarantees a durable and stable signal
• Easy parameterization via display or software EXpert

Brand : Exner

• EBC / FAU / mg/l / AU / OD or customer defined units
• Design for DN 25 weld-in sockets
• With integrated amplifier
• No traditional transmitter necessary
• Wearless sapphire windows, CIP-capable
• Hygienic design, autoclavable
• Maintenance free due to LED light source
• PC-connection via USB, Modbus RS485 or 0…20 mA current output interfaces
• Easy parametrization via EXpert software

Brand : Exner

Static probe housing for permanent installation of Ø12mm/120mm-sensors on tanks or pipelines by hygienic process connections. The probe housings are very easy to install and can be delivered with or without a sensor protection cage. The sensors used, especially glass sensors are very well protected against mechanical influences.

• Designed according to hygienic criteria
• Surface finish Ra<0,78 or Ra<0,37
• Stainless steel AISI 316L / 1.4404
• EPDM sealings with FDA and USP VI approval
• Process connections according to EHEDG / 3A
• Optional sensor protection cage
• Up to 10 bar and 140 °C
• Protection cap for cable connection

Static probe housing for permanent installation of Ø12mm/120mm-sensors on welding sockets DN25 in tanks or pipelines. The armatures are very easy to install and can be delivered with or without a sensor protection cage. The sensors used, especially glass sensors are very well protected against mechanical influences.

• Designed according to hygienic criteria
• Surface finish Ra<0,78 or Ra<0,37
• Stainless steel AISI 316L / 1.4404
• EPDM sealings with FDA and USP VI approval
• Optional sensor protection cage
• Up to 10 bar and 140 °C
• Protection cap for cable connection

EXdip 910 is an immersion fitting made of stainless steel with flanged connection and integrated orbital sensor cleaning system for nominal diameter DN50 / 2”. The probe housing is firmly screwed by a flange connection.The built-in sensor is accommodated securely in a protective cage. Directly in the range of the sensor the highly effective orbital cleaning flushing ensures a mechanical cleaning of the sensor. The immersion fitting is available in various lengths.

• Robust design
• Integrated orbital sensor cleaning system
• Extension of sensor-lifetime and reduction of maintenance efforts
• Easy installation and removal of the sensor holder
• Stainless steel AISI 316L / 1.4404
• Immersion length 500-2500mm
• Minimum size DN50 / 2”
• Up to 10 bar and 140 °C
• No external cleaning devices necessary