Parshvi Technology (India) Private Limited
Parshvi Technology (India) Private Limited
Vastral, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL

Level

We are a leading Distributor / Channel Partner of boot level switch, atex boot level switch, pendulum level switch, vibrating fork level switch for solids, level transmitter and trumen vibrating rod point level switch for solid from Ahmedabad, India.

Boot Level Switch

Boot Level Switch
  • Boot Level Switch
  • Boot Level Switch
  • Boot Level Switch
  • Boot Level Switch
Get Best Quote
Approx. Price: Rs 20,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Mounting OptionsSide Mount, Bottom Mount
Media TypeDry Material
Current Rating10 A / 250 V AC
Material/BodyMetal
BrandFILSA
Diameter200 mm
EnclosureIP65 according DIN EN60529
ModelAD INOX
Operating Temperature200 C
ProtectionIP65
Usage/ApplicationHopper,boot,chute jam level detection

Intended use

Membrane level indicator with Stainless Steel membrane to be used to control normally the minimum level of bulk solids in silos or vessels.

These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.

Function:
The membrane must to be exposed to the material.The movement of the switch is the result of the pressure exerted by the incoming bulk material against the membrane which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.

The models "A-100", "AD", "SR" y "CD2M" and the models with S.S. membrane have a regulation system by a spring that allows the adjustment of the sensitivity. Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.

The models are adjusted at their maximum sensitivity. It is necessary to ensure the proper pressure to the membrane that returns the membrane when there is no product covering it.

Mechanical connection:
Drill holes in the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the easy flow of the material and ensure that the product leaves the membrane without product on it.

Technical data

NameMembrane level indicator
TypeAD INOXref: 2212-0-742...
Density of the product0.3 t/m3 ... 2.5 t/m3
Ambient pressureAtmospherical
Maximum pressure+0.5 bar
Cable entryM20x1.5
Maximum voltage250 V AC
Contact function1 NO + 1 NC
Capacity of the contact10 A / 250 V AC
(for resistive loads)
For inductive or capacitive loads reduce at 50%
Product temperature-20 oC ... +200 ºC
Ambient temperature-20 ºC ... +80 ºC
ProtectionIP65 according DIN EN60529
Weight1.85 kg
Sensitivity200 ... 500 g adjustable
(Depending of the model. Consult your application to our Technical Department)
Materials:
HousingAluminium, RAL 7001 coated
MembraneStainless Steel 1.4301
Mounting ring and screwsAluminium ring, RAL 7001 coated and screw Zincated Steel
(Under request Stainless Steel 1.4301)
Request
Callback


Additional Information:

  • Item Code: ADINOX
Yes! I am Interested
View PDF

ATEX Boot Level Switch

ATEX Boot Level Switch
  • ATEX Boot Level Switch
  • ATEX Boot Level Switch
Get Best Quote
Approx. Price: Rs 40,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Mounting OptionsSide Mount
Usage/ApplicationBucket Elevator,Storage silos
BrandFilsa
Current Rating4 A / 250 V AC
Working Pressure+0.5 bar
Model No.AD ATEX
Material/BodyAluminium
Operating Temperature200 degree C

Intended use:

Reinforced membrane level indicator to be used to control normally the medium or minimum level of bulk solids in silos or vessels. The models are certificated for use in potentially explosive Dust atmospheres hazardous areas.

These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.

Function:

The membrane must to be exposed to the material.

The movement of the switch is the result of the pressure exerted by the incoming bulk material against the membrane which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.

The models have a regulation system by a spring that allows the adjusment of the sensitivity. Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.
The models are adjusted at their maximum sensitivity. It is necessary to ensure the proper pressure to the membrane that returns the membrane when there is no product covering it.

Mechanical connection:

Drill holes in the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the easy flow of the material and ensure that the product leaves the membrane without product on it.

Technical data:

 

NameMembrane level indicator
TypeAD INOX AT ref: 2212-A-003
(Certified model MFB-EA)
Certification B0 DustATEX WII 3D Ex tc IIIC T80°C
Density of the product0.3 t/m3 ... 2.5 t/m3
Ambient pressureAtmospherical
Maximum pressure+0.5 bar
Cable entryM20x1.5
Maximum voltage250 V AC
Contact function1 NO + 1 NC
Capacity of the contact4 A / 250 V AC
(for resistive loads)
For inductive or capacitive loads reduce at 50%
Product temperature-20 ºC ... +200 ºC
Ambient temperature-20 ºC ... +70 ºC
ProtectionIP65 according DIN EN60529
Weight1.85 kg
Sensitivity200 ... 500 g adjustable
Materials:
HousingAluminium, RAL 7001 coated
MembraneStainless Steel 1.4301
Mounting ring and screwsAluminium ring, RAL 7001 coated and screw Zincated Steel
Cable glandNiquel-plated Brass
Request
Callback


Additional Information:

  • Item Code: ADATEX
Yes! I am Interested
View PDF

Pendulum Level Switch

Pendulum Level Switch
  • Pendulum Level Switch
Get Best Quote
Approx. Price: Rs 14,000 / PieceGet Latest Price

Product Details:

Media TypeDry Material
Level Measurement TypePoint Level
Switch TypeSPDT

Intended use:
The level indicator observes the filling level as a limit switch in silos and vessels. It can be used as a full and empty indicator for dusty and powdery, granulated and grainy bulk goods with a maximum grain size up to 100 mm and with a bulk density of 0.3 to 3 t/m3.

Function:
The cone sensor must to be exposed to the material. The bulk goods, being dumped beside the pendulum, move the pendulum more aside as the filling level increases. This movement, approximetly 10 o of the rod- sensor, activates the switch for the full indication.

When the filling level falls, the pendulum moves back in the vertical position and the switch is disengaged. The model “MS-1 SR” has a regulation system by a spring that allows the adjusment of the sensitivity. Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.

Mechanical connection:
Drill 4 holes in the top of the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the verical position of the rod.

Technical data:

NamePendulum level indicator
TypeMS-1ref: 2305
MS-1 SRref: 2306
Rod lengthStandard 500 mm
(Other lengths under request)
Product density0.3 t/m3 ... 3 t/m3
Maximum pressure+0.5 bar
Cable entryM20x1.5
Switching voltage250 V AC
Switching function1 NO + 1 NC
Capacity of the contact15 A / 250 V AC
(for resistive loads)
For inductive or capacitive loads
Bulk good temperature-25 °C ... +80 °C
Ambient temperature-20 °C ... +70 °C
Type of protectionIP66 according DIN EN60529
Weight1.15 kg
Materials:
HousingAluminium, RAL 7001 coated
RodAluminium
(Under request Stainless Steel)
ConeAluminium
(Under request Stainless Steel probe)
Folding bellowNBR
Request
Callback


Additional Information:

  • Item Code: MS1
Yes! I am Interested
View PDF

Vibrating Fork Level Switch for Solids

Vibrating Fork Level Switch for Solids
  • Vibrating Fork Level Switch for Solids
Ask For Price
Product Price :Get Latest Price
We are engaged in offering Trumen Vibrating Fork Point Level Switch for Solids that are created with use of industry grade components under the guidance of our learned technicians and advanced technology. This is compact in size and can be used with universal industrial supply. This does not require any precise calibration and consumes less powers and cab be availed with remote electronic version. This can be availed at leading market rates.

Features:
  • Various customized process connections options
  • Settable switching delay as a standard feature
  • Long lasting and efficient in use
Other Details:
  • Compact size.
  • Universal industrial power supply. 15 to 80 VDC & 15 to 260 VAC)
  • Low power consumption. No calibration required.
  • Various customized process connections.
  • Starting from 1" threaded size.
  • Settable switching delay as a standard feature.
  • Remote electronic version available on request.
Request
Callback


Additional Information:

  • Item Code: LSV
Yes! I am Interested
View PDF

Level Transmitter

Level Transmitter
  • Level Transmitter
Ask For Price
Product Price :Get Latest Price

Product Details:

ApplicationIndustrial

Features
  • Differential pressure transmitter for level measurement of atmospheric and pressurised vessels
  • Operating software LAB4Level enables intuitive parameterisation of level measurements. Calculation and scaling performed by transmitter
  • Sturdy stainless steel case, degree of protection IP 65/67
  • Accuracy 0.1 %
  • Easy teach-in function for different tank shapes
  • Comprehensive parameterisation, simulation and diagnostic functions
  • Display continuously rotatable and illuminated
  • Nominal range 0.25 bar to 16 bar
  • Output signal 4…20 mA with HART® - protocol
  • Configuration memory
  • Medium temperature – 90 up to 200 °C
  • Various metallic diaphragm seals and coatings
  • Approved according to NAMUR NE95
  • EAC declaration (upon request)Features
    • Differential pressure transmitter for level measurement of atmospheric and pressurised vessels
    • Operating software LAB4Level enables intuitive parameterisation of level measurements. Calculation and scaling performed by transmitter
    • Sturdy stainless steel case, degree of protection IP 65/67
    • Accuracy 0.1 %
    • Easy teach-in function for different tank shapes
    • Comprehensive parameterisation, simulation and diagnostic functions
    • Display continuously rotatable and illuminated
    • Nominal range 0.25 bar to 16 bar
    • Output signal 4…20 mA with HART® - protocol
    • Configuration memory
    • Medium temperature – 90 up to 200 °C
    • Various metallic diaphragm seals and coatings
    • Approved according to NAMUR NE95
    • EAC declaration (upon request)
    Options
    • Explosion protection for gases and dust
    • Classification per SIL2
    • Certificate of measuring equipment for Russian Federation
    • Calibration certificate per DIN EN 10204
    • Removable display and control unit
    • Degree of protection IP 69K
    • Front cover of stainless steel with window of non splintering glass
Request
Callback
Yes! I am Interested
View PDF

Trumen Vibrating Rod Point Level Switch for Solid

Trumen Vibrating Rod Point  Level Switch for Solid
  • Trumen Vibrating Rod Point  Level Switch for Solid
  • Trumen Vibrating Rod Point  Level Switch for Solid
Ask For Price
Product Price :Get Latest Price

Product Details:

Mounting OptionsSide Mount, Top Mount
Media TypeDry Material

We are one of the leading supplier of a wide range ofVibrating Rod Point Level Switch. Customized as per the requirements and demands of the clients, these products are quite popular in the industry. We also have team of skilled professionals who are involved in the testing of these products as per the international standards of quality.

Applications:
  • Free flowing powders and granules.
  • Suitable for side as well as top mounting.
  • Minimum and maximum fail safe field selectable.
  • Process temperature max 200 ºC.
  • Process pressure max. 15 bar.
Features:
  • Compact size.
  • Universal industrial power supply.(12 to 80 VDC & 12 to 265 VAC).
  • Low power consumption.
  • No calibration required.
  • Customized process connections like Threaded/Flanged/Hygienic etc.
  • Settable switching delay as a standard feature.
Request
Callback
Yes! I am Interested
View PDF

Trumen Vibrating Fork Point Level Switch for Liquids

Trumen Vibrating Fork Point Level Switch for Liquids
  • Trumen Vibrating Fork Point Level Switch for Liquids
Ask For Price
Product Price :Get Latest Price
Applications:
  • For free-flowing liquids with liquid viscosity up-to 10,000cP
  • Suitable for side as well as top mounting
  • Minimum and maximum fail safe field selectable
  • Flow/no-flow detection in pipe-lines
  • PTFE/PFA/ECTFE coatings for corrosive liquids
  • Process temperature max 200 ºC
  • Process pressure max. 15 bar
Features:
  • Compact size
  • Universal industrial power supply (12 to 80 VDC & 12 to 265 VAC)
  • Low power consumption
  • No calibration required
  • Customized process connections. like Threaded/Flanged/Hygienic etc starting form 1/2"
Request
Callback


Additional Information:

  • Item Code: LFV
Yes! I am Interested
View PDF

Vibrating Fork Point Level Switch

Vibrating Fork Point Level Switch
  • Vibrating Fork Point Level Switch
  • Vibrating Fork Point Level Switch
  • Vibrating Fork Point Level Switch
  • Vibrating Fork Point Level Switch
Ask For Price
Product Price :Get Latest Price

Applications:

All liquids from free-flowing to viscosity up-to 10,000cP.Suitable for side as well as top mounting.Minimum and maximum fail safe field selectable.Flow/No-Flow detection in pipe-lines.Process temperature max 150 ºC.Process pressure max. 15 bar.Features:

Compact sizeUniversal industrial power supply (12 to 80 VDC & 12 to 265 VAC)Low power consumptionNo calibration requiredVarious customized process connections. like Threaded/Flanged/TC etc starting form 1/2"

Request
Callback


Additional Information:

  • Item Code: LFV11-12
Yes! I am Interested
View PDF

Two-Wire Capacitance Continuous Level Transmitter

Two-Wire Capacitance Continuous Level Transmitter
  • Two-Wire Capacitance Continuous Level Transmitter
Ask For Price
Product Price :Get Latest Price
Applications:
  • Free flowing homogeneous liquids.
    like oil, raw water, WFI, DM/DI water etc.
  • Suitable for top mounting.
  • Process temperature max. 200 ºC.
  • Process pressure max. 20 bar.
  • Suitable for corrosive liquids.
Features:
  • Compact size.
  • Rigid rod/flexible rope versions.
  • Wide range industrial dc power supply (12 to 60 VDC).
  • Loop powered device (true-two wire).
  • No potentiometers - hassle free calibration.
  • Various customized process connections like Threaded/Flanged/Hygienic etc.
  • Water bed sensing for oil/fuel/fatty-acid applications.
Request
Callback


Additional Information:

  • Item Code: TLC
Yes! I am Interested
View PDF

Capacitance Points Level Switch

Capacitance Points Level Switch
  • Capacitance Points Level Switch
  • Capacitance Points Level Switch
  • Capacitance Points Level Switch
Ask For Price
Product Price :Get Latest Price

Product Details:

Model NumberLMC

Applications:
  • Suitable for all non sticky liquids and solids
  • Suitable for side as well as top mounting.
  • Single point/multipoint/pump control switching on single probe.
  • Minimum and maximum fail safe field selectable.
  • Process temperature up to 600 ºC. ( Ceramic Insulation)
  • Process pressure max. 15 bar.
  • PTFE coated for corrosive and conductive liquids.
  • Exd version available suitable for gas group II C,T6 as per IEC 60079-1-2007 & IEC 600529-2001
Features:
  • Compact size.
  • Universal industrial power supply.(15 to 80 VDC & 15 to 260VAC).
  • Low power consumption.
  • Easy Dip Switch calibration.
  • Customized process connections like Threaded/Flanged/Hygienic etc.
  • Remote Electronic Version avaliable on request.
Request
Callback


Additional Information:

  • Item Code: LMC
Yes! I am Interested
View PDF

Admittance Point Level Switch

Admittance Point Level Switch
  • Admittance Point Level Switch
Ask For Price
Product Price :Get Latest Price
Applications:
  • Suitable for all sticky/non-sticky bulk solids & liquids
  • Suitable for side as well as top mounting
  • Process temperature max 600 ºC (ceramic insulation)
  • Process pressure max. 15 bar
  • Minimum and maximum fail safe field selectable
Features:
  • Compact size
  • Universal industrial power supply (12 to 80 VDC & 12 to 265 VAC)
  • Low power consumption
  • Easy calibration
  • Active shield compensation against material build-up
  • Static charge safe for fly-ash, acids, plastic & other.Applications susceptible to static charge/electricity
  • Customized process connection like Threaded/Flanged etc
Request
Callback


Additional Information:

  • Item Code: LSY
Yes! I am Interested
View PDF

Conductivity Point Level Switch

Conductivity Point Level Switch
  • Conductivity Point Level Switch
  • Conductivity Point Level Switch
Ask For Price
Product Price :Get Latest Price

Product Details:

Mounting OptionTop Mount, Side Mount

Applications:
  • Suitable for conductive liquids like water.
  • Top mounting side mounting option.
  • Minimum and maximum fail safe field selectable.
  • Single point/multipoint/pump control switching.
  • Process temperature Max. 200 ºC.
  • Process pressure max. 10 bar.
  • Exd version available suitable for gas group II C,T6 as per IEC 60079-1-2007 IEC 600529-2001
Features:
  • Compact size.
  • Integral version with universal industrial power supply(15 to 80 VDC 15 to 260VAC).
  • Split models with controller + probe with 80 to 260 VAC or 24 VDC.
  • Low power consumption.
  • No calibration required
  • Customized process connections like Threaded/Flanged.
  • Remote Electronic Version avaliable on request.
Request
Callback


Additional Information:

  • Item Code: LWS
Yes! I am Interested
View PDF

Float Levels Switch

Float Levels Switch
  • Float Levels Switch
Ask For Price
Product Price :Get Latest Price
Intended use:
The float level switch B-1 is used to keep between 2 points the level of liquid like water, oil, chemical products, etc., conductive or not, in tanks or recipients at atmospheric pressure.
The float of the model B-1 2P is designed to can be introduced into the normally thread socket 2 " of the fuel or oil tanks and deposits.
Function:
The B-1 bases its work due to the movement of a float. When the level of liquid rises up, the float reaches the mechanical stop and pull up the lower counterweight. This enables the action of the lever and reverses the position of the switch.
The adjustment of the commutation of the switch is obtained adjusting the mechanical stops at the desired cable point. If the float is blocked with the mechanical stops, it can be obtained only one punctual signal.

Mechanical connection:
It is simple: the float must be vertically installed on the top of the tank with an appropiate support to fix it. The tank can have a cap to preserve the liquid against dust. Just a little hole in the cap allows the free movement of the cable.

Technical data:
NameFloat switch
TypeB-1ref: 2505
B-1 2Pref: 2505-2P
Cable lengthStandard 2.000 mm
(Other lenghts under request)
Product density
B-10.5 kg/l
B-1 2P0.7 kg/l
Tank pressureAtmospherical
Cable entry3 of M20x1.5
Switching voltage240 V AC
Switching function1 NO + 1 NC Double-Pole Double- Throw (DPDT)
Capacity of the contact3 A / 240 V AC
(for resistive loads)
For inductive or capacitive loads, reduce at 50%
Liquid temperature-20 °C ... +300 °C
Switch temperature-20 °C ... +70 °C
ProtectionIP66 according DIN EN60529
Weight0.30 kg
Float weight
B-10.18 kg
B-1 2P0.10 kg
Counterweight weight0.16 kg
Materials:
SwitchAluminium
FloatStainless Steel 1.4401
CounterweightStainless Steel 1.4305
Mechanical stopsStainless Steel AISI 1.4305
CableStainless Steel 1.4401
Request
Callback


Additional Information:

  • Item Code: B-1
Yes! I am Interested
View PDF

Ultrasonic Level Transmitter

Ultrasonic Level Transmitter
  • Ultrasonic Level Transmitter
Ask For Price
Product Price :Get Latest Price
Application:
  • Continuous, non-contact level measurment in fluids, pastes, and coarse bulk materials
  • Flow measurment in open channels.
  • Max-ranges 30 Mtr. in liquid.
  • Process Temperature -40 to 80 Deg C
  • Process Pressure Max 3 Bar.
Features:
  • Min resolution 1mm
  • LCD Display
  • Intelligent signal processing technology
  • Simple configuration parameters, without waiting for emptying containers.
  • Rot-proof plastic crust protect grade IP 67
  • Easy Configuration
Request
Callback


Additional Information:

  • Item Code: TLU
Yes! I am Interested
X

Explore more products



Reach Us
Ramnarayan Ajmera (Sales & Marketing Manager)
Shop No. 303-304, Block C, 3rd Floor, Pushp Business Campus S. P. Ring Road, Vastral Cross Road, Vastral
Ahmedabad- 382418, Gujarat, India



Call Us


Send E-mailSend SMS