Thermocouple:Within 0.2% of each input span 1 digit,RTD Within 0.1% of each input span1 digit
5-digit PV,SV Displays
Relay contact 1a,Non-contact voltage (for SSR drive),Direct current
35 to 85%RH (Non-condensing)
New standard controllers!
Convenient Initial setting mode!
AT on startup function!
Simplified Program control!
Simplified converter function!
A variety of Event Input/Output functions!
Large, Easy-to-view, 5-digit PV, SV Displays!
Compact, 60 mm-deep control panel interior!
Simple settings from a PC
Drip-proof/Dust-proof IP 66
New standard controllers: BCx2 series, Shinko''s digital indicating controllers are succession models of the JC series, with remarkable enhancement in operation, control performance, function, visibility, and compactness, etc.
Convenient Initial setting mode: In this mode, frequently used setting items are collected. Control can be started by setting those items in this mode
AT on startup function: This function can be used when usual AT cannot be performed normally due to temperature fluctuations. PID parameters can be calculated only when the temperature is rising.
Simplified converter function: For DC current output type, the controller can be used as a converter. Input signal is converted to insulated 4 to 20 mA DC, and outputted at the converted value.
A variety of Event Input/Output functions: A maximum of 2 points of Event input (optional), and 2 points of Event output (1 point is standard). Selectable from various Input/Output choices: Alarm output, Heater burnout alarm output (optional), Loop break alarm output, Time signal output, Pattern end output, etc.
Large, Easy-to-view, 5-digit PV, SV Displays: Large, easy-to-view, 5-digit PV, SV Displays, useful for indicating a wide range of measurement ranges.
1. BCD2: Character size 24 x 11 mm (H x W) 2.JCD-33A: Character size 18 x 8 mm (H x W)
Compact, 60 mm-deep control panel interior: With a depth of only 60 mm, the BCx2 series is ideal for mounting in nearly any control panel situation.
1.BCD2: Depth of control panel interior 60 mm 2.JCD-33A: Needs a control panel interior of 98.5 mm
Simple settings from a PC: By connecting the BCx2 to a PC using the tool cable (sold separately), and by using dedicated software, various settings can be carried out. Wiring of BCx2 is not necessary as power to the BCx2 is supplied by PC via USB.
Drip-proof/Dust-proof IP 66: P66 structure (for the front panel) allows usage in harsh environments where the controller is exposed to water or dust.